| Product SKUs |
| MBD-X9DRD-7LN4F-JBOD-O | X9DR7-LN4F-JBOD (Standard Retail Pack) |
| Physical Stats |
| Form Factor | Extended ATX |
| Dimensions | 12" x 13" (30.5cm x 33.2cm) |
| Processor/Cache |
| CPU | Intel® Xeon® processor E5-2600 (up to 135W TDP **)
Dual Socket R (LGA 2011)
Cache
Up to 20MB |
| System Bus | QPI up to 8 GT/s
** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| System Memory |
| Memory Capacity | 16x 240-pin DDR3 DIMM sockets
Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM) |
| Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5V, 1.35V |
| On-Board Devices |
| Chipset | Intel® C602J chipset |
| SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10 |
| SAS | SAS2 (6Gbps) via LSI 2308
IT mode for SAS2 in default (no RAID) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC |
| Network Controllers Video | Intel® i350 Quad Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) Matrox G200eW |
| Input / Output |
| AHCI SATA SCU SATA | 2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps - |
| SAS | 8 SAS2 ports (6Gbps) |
| LAN | 4 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port |
| USB | 9 USB 2.0 ports total
(4 rear + 4 via header + 1 Type A) |
| Video | 1 VGA port |
| Serial Ports | 1 Fast UART 16550 port / 1 Header |
| DOM TPM | 1 DOM (Disk on Module) power connector 1 TPM 1.2 20-pin Header |
| Chassis ( Optimized for X9DRD-7LN4F-JBOD ) |
| | 1U Chassis
CSE-815TQ-600CB
2U Chassis
CSE-825TQ-R740LPB
CSE-826BA-R1K28LPB
CSE-826BA-R920LPB
CSE-826BE16-R1K28LPB
CSE-826BE16-R920LPB
CSE-826BE26-R1K28LPB
CSE-826BE26-R920LPB
3U Chassis
CSE-835TQ-R920B
Tower / 4U Rackmount
CSE-846BA-R1K28B
CSE-846BE16-R1K28B
CSE-846BE26-R1K28B
CSE-847A-R1400B
CSE-847A-R1K28LPB
CSE-847DE16-R1K28LPB
CSE-847E16-R1400B
CSE-847E16-R1K28LPB
CSE-847E26-R1400B
CSE-847E26-R1K28LPB |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
Please use optional I/O shield MCP-260-00041-0N in Supermicro 1U chassis |
| Expansion Slots |
| PCI-Express | 6 (x8) PCI-E 3.0 slots (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.) |
| PCI | - |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
BIOS rescue hot keys
USB Keyboard support
SMBIOS 2.7.1
UEFI |
