Physical Stats |
Form Factor |
ATX |
Dimensions |
12" length x 10" width
(30.5cm x 25.4cm)
PCB height: 0.062"(62mil)
Board height: 0.041"(41mil) |
Processor/Cache |
CPU |
Dual 604-pin FC-mPGA4 Sockets
Supports up to two Intel® 64-bit Xeon™ processor(s)
of the same type below:
Xeon (Nocona) CPU with 1MB L2 Integrated
Advanced Transfer Cache, up to 3.60 GHz
Xeon (Irwindale) CPU with 2MB L2 Integrated
Advanced Transfer Cache, up to 3.60 GHz
Xeon LV (Low Voltage) CPU , up to 2.8 GHz |
System Bus |
800 MHz system bus |
Operating System
Software |
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
OS
Compatibility Chart
|
System Memory |
Memory Capacity |
Four 240-pin DIMM sockets
Supports up to 8 GB DDR-II 400MHz memory
Dual channel memory bus
Memory must be populated in pairs |
Memory Type |
DDRII 400MHz registered ECC buffered SDRAM 72-bit,
240-pin gold-plated DIMMs |
DIMM Sizes |
2GB, 1GB, 512MB, 256MB |
Memory Voltage |
1.8 V only |
Error Detection |
Supports Single Device Data Correction (SDDC) |
On-Board Devices |
Chipset |
Intel® E7320 chipset
MCH + 6300ESB + 82541GI |
SATA |
6300ESB (Hance Rapids) SATA Controller (2x Drive
support)
2x SATA Ports
RAID 0, 1 support |
IPMI |
Support for Intelligent Platform Management Interface
v.2.0
( Optional :AOC-IPMI20-E
) Card not included.
|
Network Controllers |
Dual Intel® 82541GI
Single Port Gigabit Controller
Support for 10Base-T, 100Base-TX, 1000BASE-T, and
2x RJ45 |
Graphics |
ATI Rage XL SVGA PCI video controller with 8 MB
of video memory |
Super I/O |
Winbond 83627HF chip |
Clock Generator |
ICS9DB104BFT |
Input / Output |
Serial ATA |
Two Serial ATA ports
Two SATA hard drives supported |
IDE |
Dual EIDE channels support up to four UDMA / IDE
devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
Floppy |
1 Floppy controller; 1.44 MB support |
LAN |
2x RJ45 LAN port |
USB |
2x USB rear ports
1x USB internal header for 2 ports
USB 2.0 Compliant / 1.1 Compliant |
VGA |
1x VGA port |
Keyboard / Mouse |
PS/2 keyboard and mouse ports |
Serial Port / Header |
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header |
Chassis ( Optimized
for X6DVL-EG2 ) |
1U |
SC811i-420
|
Rackmount Tower
/ 4U |
SC743i-650
SC742i-420/500
|
Mid-Tower |
SC733i-450
|
Important Chassis
Notes |
To ensure system stability, a 420W (minimum) ATX
power supply
[8-pin (+12V) and 24-pin are required]
Chassis must have CPU mounting holes required for
800MHz FSB CPUs with this serverboard. |
Expansion Slots |
PCI-Express |
2 (x4) PCI-e slots |
PCI |
1x 64-bit 66MHz PCI (3.3V) slot
(PCI-X cards are not supported in this slot) |
PCI |
3x 32-bit 33MHz PCI (5V) slots |
System BIOS |
BIOS Type |
8Mb Flash EEPROM with AMI® BIOS (SST) |
BIOS Features |
Plug and Play (PnP)
ACPI 1.0
APM 1.2
DMI 2.3
PCI 2.2
SMBIOS 2.3
Hardware BIOS Virus protection
USB Keyboard Support |
Management |
Software |
Optional IPMI (Intelligent Platform Management
Interface) 2.0
Super Doctor
III
Watch Dog
NMI |
Power Configurations |
ACPI/APM Power Management
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Main Switch Override Mechanism
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on |
PC Health Monitoring |
CPU |
Monitors for CPU Cores +3.3V, +5V, ±12V & +5V
Standby
CPU Core 3-Phase-switching voltage regulator with
auto-sense from 0.83V-1.61V
Adjustable CPU clock frequency ratio |
FAN |
Total of six 4-pin fan headers
6x fans with status tachometer monitoring
Status monitor for on/off control
Status monitor for speed control
Support for 3-pin fan and 4-pin fan speed control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connector |
Temperature |
Monitoring for CPU, chassis environment
CPU thermal trip support
Thermal Control for 6x Fan Connectors
I 2 C temperature sensing logic
Thermal Monitor 2 (TM2) support |
LED |
CPU / System Overheat LED
Suspend-state indicator LED
+5V Standy Alert LED |
Other Features |
Chassis intrusion detection
Chassis intrusion header
SDDC Support |