| Specifications |
| Brand |
Supermicro |
| Model |
X7DCL-i-O
(Standard Retail Pack) |
| Processor/Cache |
| Processor |
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s)
of the same type below:
Quad-Core Intel®
Xeon®Processor
5400/5300 sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz
Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to
3.40 GHz |
| System Bus |
1333 / 1066 MHz system
bus |
| Operating
System Software |
Supports 64-bit Operating
Systems
Supports 32-bit Operating Systems |
| System Memory |
| Memory Capacity |
Six 240-pin DIMM sockets
Supports up to 32GB 667/ 533MHz DDR2 ECC Register Single
Rank memory
Dual branch memory bus
Memory must be populated in pairs |
| Memory Type |
667/533MHz Register
DDR2 ECC Single Rank SDRAM 72-bit, 240-pin gold-plated
DIMMs |
| DIMM Sizes |
256MB, 512MB, 1GB,
2GB, 4GB, 8GB** |
| Memory Voltage |
1.8V only |
| Error Detection |
Corrects single-bit
errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction
(SDDC) |
| On-Board Devices |
| Chipset |
Intel® 5100 (San
Clemente) chipset
Intel® ICH9R |
| SATA |
Intel ICH9R SB SATAII
Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux) |
| IPMI |
Support for Intelligent
Platform Management Interface v.2.0 / 1.5
200-pin IPMI slot (SIMLC)
(Optional: AOC-SIMLC) |
| Network Controllers |
Intel® 82573V &
82573L Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics |
XGI Z9 with 32 MB of
video memory |
| Super I/O |
Winbond 83627DHG chip |
| Clock Generator |
CK505 chip |
| Input/Output |
| Serial ATA |
Six Serial ATA ports
Six SATA hard drives supported |
| IDE |
Single EIDE channel
supports up to two UDMA IDE devices(IDE-M, IDE-S) including
CF card
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Compact Flash (40-pin connector, IDE 1, single channel)
slot |
| Floppy |
1 Floppy controller;
1.44 MB |
| LAN |
2x RJ45 LAN ports |
| USB |
2x USB rear ports
3x USB internal header
5 total USB ports, 2.0 Compliant / 1.1 Compliant |
| VGA |
1x VGA Port |
| Keyboard/Mouse |
PS/2 keyboard and mouse
ports |
| Serial Port/Header |
1 Fast UART 16550 serial
port
1 Header |
| Chassis ( Optimized for X7DCL-i) |
| 1U Chassis |
CSE-512F-520
CSE-512F-280
CSE-513L-420
CSE-811TQ-520
CSE-811TQ-280
CSE-811i-520
CSE-811i-280
CSE-813MTQ-520C
CSE-813MTQ-280C
CSE-813MT-420C
CSE-813MT-410C |
| 2U Chassis |
CSE-523L-520
CSE-823TQ-550LP
CSE-823T-550LP
CSE-823i-550
CSE-823MTQ-R700LP
CSE-825TQ-R700LP
CSE-825TQ-560LP
CSE-825MTQ-R700LP |
| Mid Tower |
CSE-733TQ-645
CSE-733TQ-465
CSE-733i-645
CSE-733i-465 |
| Tower / 4U Rackmount |
CSE-743T-645
CSE-743i-645 |
| Important Chassis Notes |
To ensure system stability,
a 500W (minimum) ATX power supply
[ 8-pin (+12V) and 24-pin are required] |
| Expansion Slots |
| PCI-Express |
2 (x8) PCI-e slots
1 (x4) PCI-e (using x8) slot |
| PCI |
3x 32-bit PCI slots
|
| Specifications |
| BIOS Type |
8Mb Flash EEPROM with
Phoenix ® BIOS |
| BIOS Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.3 |
| Management |
| Software |
Optional IPMI (Intelligent
Platform Management Interface) v1.5 / 2.0
Super Doctor III
Watch Dog
NMI |
| Power Configurations |
ACPI Power Management
Main Switch Override Mechansim
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal/External modem remote ring-on |
| Management |
| CPU |
Monitors for CPU Cores,+1.8V,
+3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT,
HT, Memory, Chipset
CPU Core 6-Phase-switching voltage regulator with auto-sense
from 0.8375V-1.60V |
| FAN |
Total of six 4-pin
fans
6x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Support for 3-pins (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors |
| Temperature |
Monitoring for CPU
and chassis environment
CPU thermal trip support
Thermal Control for 6x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI |
| LED |
CPU / System Overheat
LED
Suspend-state Indicator LED |
| Other Features |
Chassis intrusion detection
Chassis intrusion header
Chipkill Support |
| RoHS |
RoHS Compliant 6/6,
Pb Free |
