Part Number |
MBD-X7DBR-3-B |
• X7DBR-3
( BULK PACK ) |
Physical Stats |
Form Factor |
• Extended ATX |
Dimensions |
• 12" x 13.05" (30.5cm x 33.2cm)
|
Processor/Cache |
CPU |
• Dual 771-pin LGA Sockets
• Supports up to two Intel® 64-bit Xeon® processor(s)
of the same type below:
• Dual-Core Intel® Xeon® Processors 5000X sequence (Dempsey processor) with 2MB L2 Integrated
Advanced Transfer Cache per core, 4MB L2 cache total, up to 3.73 GHz
|
System Bus |
• 1333 MHz, 1066 & 667 MHz system bus
|
Operating System Software |
• Supports 64-bit Operating Systems
• Supports 32-bit Operating Systems
|
System Memory |
Memory Capacity |
• Eight 240-pin DIMM sockets
• Supports up to 32 GB 667 / 533MHz DDRII ECC FB-DIMM memory
• Dual channel memory bus
• Memory must be populated in pairs
• Memory Mirroring supported
|
Memory Type |
• 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDRII ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
•
512 MB, 1GB, 2GB, 4GB |
Memory Voltage |
• 1.8
V only / 1.5 V(AMB) |
Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
On-Board Devices |
Chipset |
• Intel® 5000P (Blackford) chipset
• MCH + PXH-V + ESB2 |
SAS |
• Adaptec AIC-9410 Serial-Attached SCSI (SAS) Controller
• Dual-Channel SAS (1 internal, 1 external)
• Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
• Host RAID 0, 1, & 10 support
|
SATA |
• Intel ESB2 SATAII Controller
• RAID 0, 1, 5, 10 support
|
RAID |
• Support for Zero-Channel RAID with AOC-LPZCR2 or AOC-LPZCR1
• Optional: (Card not included)
• RAID 0, 1, 5, 10
|
IPMI |
• Support for Intelligent Platform Management Interface
v.2.0 ( Optional )
• 200-pin IPMI SO-DIMM socket (SIMSO)
• Optional: AOC-SIMSO
|
Network Controllers |
• Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Graphics |
• ATI ES1000 controller with 16 MB of video memory |
Super I/O |
• Winbond 83627HF chip |
Input / Output |
SAS |
• Eight SAS / SATA ports (4 internal, 4 external)
• Dual-Channel SAS controller
• Eight SAS / SATA hard drives supported
|
Serial ATA |
• SixSerial ATA ports
• 3 Gbps transfer rate
• Six SATA hard drives supported |
IDE |
• Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
• Compact Flash (40-pin connector, IDE 1, single channel) slot
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy |
• 1 Floppy controller; 1.44 MB, 2.88 MB
|
LAN |
• 2x RJ45 LAN ports |
USB |
• 2x
USB rear ports
• 3x USB internal headers
• Total 5 USB 2.0 Compliant / 1.1 Compliant
|
Keyboard / Mouse |
• PS/2 keyboard and mouse ports |
Serial Ports |
• 1 Fast UART 16550 serial ports
• 1 Fast UART 16550 serial header
|
Parallel
Port |
• 1 ECP / EEP parallel port |
VGA |
• 1x VGA Port
|
Chassis ( Optimized for
X7DBR-3) |
1U Chassis |
• SC812L-520
• SC815TQ-560
• SC815TQ-R560
• SC823i-550LP
• SC815TQ-700
|
2U Chassis |
• SC825TQ-R700RC
|
`
Important Chassis
Notes |
• To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
Expansion Slots |
PCI-X
/ PCI-Express |
• 2 Universal slots each slot supports:
• |
System BIOS |
BIOS Type |
• 8Mb Flash EEPROM with Phoenix® BIOS |
BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• PCI 2.2
• ACPI 1.0 • USB Legacy Support
• Hardware BIOS Virus Protection
|
Management |
Software |
• Optional IPMI (Intelligent Platform Management
Interface) 2.0
• Super Doctor
III
• Watch Dog
• NMI |
Power Configurations |
• ACPI / APM Power Management
• Wake-On-Ring (WOR) header
• Main Switch Override Mechanism
• Wake-On-LAN (WOL) header
• Power-on mode control for AC power loss recovery
• Internal / External modem remote ring-on |
PC Health Monitoring |
CPU |
• Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V
• 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
FAN |
• Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
• 8x fans with tachometer status monitoring
• Low noise fan speed control
• Pulse Width Modulated (PWM) fan connector
• Status monitor for on/off control
• Status monitor for speed control |
Temperature |
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• PSU I2C temperature sensing logic
• Thermal Control for 8x fan connectors
• Thermal Monitor 2 (TM2) support |
LED |
• CPU / System Overheat LED
|
Other Features |
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support |
RoHS
|
• RoHS Compliant 5/6, Server Exemption
|