| Part Number |
| MBD- X7DVL-E-O |
• X7DVL-E
( RETAIL PACK ) |
| Physical Stats |
| Form Factor |
•
ATX |
| Dimensions |
• 12" x 10" (30.5cm x 25.4cm)
|
| Processor/Cache |
| CPU |
• Dual 771-pin LGA Sockets
• Supports up to two Intel® 64-bit Xeon® processor(s)
of the same type below:
Dual-Core Intel® Xeon® Processor 5000 sequence (Dempsey processor) with 2MB L2 Integrated Advanced Transfer Cache per core, 4MB L2 cache total, up to 3.73 GHz
|
| System Bus |
• 1333 MHz, 1066 & 667 MHz system bus
|
| Operating System Software |
• Supports 64-bit Operating Systems
• Supports 32-bit Operating Systems
|
| System Memory |
| Memory Capacity |
• Six 240-pin DIMM sockets
• Supports up to 16 GB 667 / 533MHz DDRII ECC FB-DIMM memory
• Dual branch memory bus
• Memory must be populated in pairs
• No Memory Mirroring support
|
| Memory Type |
• 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDRII SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
•
512 MB, 1GB, 2GB, 4GB |
| Memory Voltage |
• 1.8
V only / 1.5 V(AMB) |
| Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| On-Board Devices |
| Chipset |
• Intel® 5000V (Blackford VS) chipset
• MCH + PXH-V + ESB2 |
| SATA |
• Intel ESB2 SATAII Controller
• RAID 0, 1, 5, 10 support
|
| IPMI |
• Support for Intelligent Platform Management Interface
v.2.0 ( Optional )
• 200-pin IPMI slot (SIM1U)
• (Optional: AOC-SIMLC)
|
| Network Controllers |
• Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics |
• ATI ES1000 controller with 16 MB of video memory |
| Super I/O |
• Winbond 83627HF chip |
| Input / Output |
| Serial ATA |
• SixSerial ATA ports
• Six SATA hard drives supported |
| IDE |
• Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
• Compact Flash (40-pin connector, IDE 1, single channel) slot
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
• 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
• 2x RJ45 LAN ports |
| USB |
• 2x
USB rear ports
• 2x USB internal headers
• Total 6 USB 2.0 Compliant / 1.1 Compliant
|
| Keyboard / Mouse |
• PS/2 keyboard and mouse ports |
| Serial Ports |
• 1 Fast UART 16550 serial ports
• 1 Fast UART 16550 serial header
|
| Parallel
Port |
• 1 ECP / EEP parallel port
|
| VGA |
• 1x VGA Port
|
| Chassis ( Optimized for X7DVL-E
) |
| 1U Chassis |
• SC811T-520
• SC512F-520 (Mini 1U)
|
| 3U Chassis |
• SC733TQ-645 (MCP-310-00010-01 air shroud required)
• SC733T-645
• SC733i-645
|
`
| Important Chassis
Notes |
• To ensure system stability, a 500W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required]
|
| Expansion Slots |
|
PCI-Express |
• 1
(x8) PCI-e slot
• 1 (x4) PCI-e (using x8) slot
|
| PCI-X
|
• 2x 64-bit 133/100MHz PCI-X (3.3V) slots
|
| PCI |
• 2x 32-bit 33MHz PCI (5V) slots
|
| System BIOS |
| BIOS Type |
• 8Mb Flash EEPROM with Phoenix® BIOS |
| BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• PCI 2.2
• ACPI 1.0
• USB Legacy Support
• Hardware BIOS Virus Protection
|
| Management |
| Software |
• Optional IPMI (Intelligent Platform Management
Interface) 2.0
• Super Doctor
III
• Watch Dog
• NMI |
| Power Configurations |
• ACPI / APM Power Management
• Wake-On-Ring (WOR) header
• Main Switch Override Mechanism
• Wake-On-LAN (WOL) header
• Power-on mode control for AC power loss recovery
• Internal / External modem remote ring-on |
| PC Health Monitoring |
| CPU |
• Monitors for CPU Cores, +3.3V, +5V, ±12V
• 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN |
• Total of six 4-pin fan headers
supporting up to 6 fans
• 6x fans with tachometer status monitoring
• Low noise fan speed control
• Status monitor for on/off control
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• PSU I2C temperature sensing logic
• Thermal Control for 6x fan connectors
• Thermal Monitor 2 (TM2) support |
| LED |
• CPU / System Overheat LED
|
| Other Features |
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support |
RoHS
|
• RoHS Compliant 5/6, Server Exemption
|
