Part Number |
MBD- X7DA3-O |
• X7DA3-O |
Physical Stats |
Form Factor |
• Proprietary |
Dimensions |
• 12.075" x 13.05" (30.7cm x 33.2cm) |
Processor/Cache |
CPU |
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s)
of the same type below:
- Dual-Core Intel® Xeon® Processor
5100/5000 sequence (Woodcrest/Dempsey processor)
with 2MB L2 Integrated Advanced Transfer
Cache per core, 4MB L2 cache total, up to
3.73 GHz
|
System
Bus |
1333 MHz, 1066 & 667 MHz system bus |
Operating
System Software |
• Supports
64-bit Operating Systems
• Supports 32-bit Operating Systems |
System Memory |
Memory
Capacity |
Eight 240-pin DIMM sockets
Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM
memory
Dual branch memory bus
Memory must be populated in pairs
Memory Mirroring supported
|
Memory
Type |
• 667
/ 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM
72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes |
• 512
MB, 1GB, 2GB, 4GB |
Memory
Voltage |
1.8 V only
1.5V(AMB)
|
Error
Detection |
•
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data
Correction (SDDC)
|
On-Board Devices |
Chipset |
Intel® 5000X (GreenCreek) chipset
MCH + PXH-V + ESB2
|
SATA |
Intel ESB2 SATAII Controller
RAID 0, 1, 5, 10 support
|
SAS |
Adaptec AIC-9410W Serial-Attached SCSI (SAS)
Controller
SAS Dual-Channel (internal)
Each SAS channel supports up to 4 SAS / SATA
drives for a total of up to 8 SAS or SATA hard
drives
Host RAID 0, 1, & 10 support
|
RAID |
Support for Zero-Channel RAID with Supermicro
All-In-One-ZCR Card :AOC-LPZCR2
RAID 0, 1, 5, 10
Optional: (Card NOT included)
|
Network
Controllers |
Intel® 82563EB Dual-Port Gigabit Ethernet
Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output
Intel® I/OAT support for fast, scaleable,
and reliable networking
|
Super
I/O |
Winbond 83627HG chip |
Input / Output |
Serial
ATA |
Six Serial ATA ports
Six SATA hard drives supported
|
IDE |
Single EIDE channel supports up to two UDMA IDE
devices(IDE-M, IDE-S) including CF card
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Compact Flash (40-pin connector, IDE 1, single
channel) slot
|
Floppy |
• 1
Floppy controller; 1.44 MB, 2.88 MB |
LAN |
• 2x
RJ45 LAN ports |
USB |
4x USB rear ports
2x USB internal header
6 total USB ports, 2.0 Compliant / 1.1 Compliant
|
Keyboard
/ Mouse |
• PS/2
keyboard and mouse ports |
Serial
Ports |
• 1
Fast UART 16550 serial ports
• 1 Fast UART 16550 serial header |
Parallel
Port |
1 ECP / EEP parallel port
|
Chassis ( Optimized for
X7DVL-E ) |
2U Chassis |
SC825TQ-R700LPV
SC825TQ-560LP
SC823T-550LP
|
3U Chassis |
SC836TQ-R800V
SC836E2-R800
SC836E1-R800
SC833T-R760
SC833T-550
SC933E2-R760
SC933E1-R760
SC933T-R760
|
`
Tower/4U
Rackmount |
SC745TQ-R800
SC745TQ-700
SC743TQ-R760
SC743T-R760
SC743T-650
|
`
Important
Chassis Notes |
• To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
Expansion Slots |
PCI-Express |
• 1
(x16) PCI-e slot
• 1 (x4) PCI-e (using x16) slot
|
PCI-X |
2x 64-bit 133/100MHz PCI-X (3.3V) slots
1x 64-bit 100MHz PCI-X (3.3V) slot
|
PCI |
1x 32-bit 33MHz PCI (5V) slot
|
System BIOS |
BIOS
Type |
8Mb
Flash EEPROM with Phoenix® BIOS |
BIOS
Features |
Plug and Play (PnP)
SMBIOS 2.3
DMI 2.3
PCI 2.2
ACPI 1.0
PCI-X 1.0
USB Keyboard support
Hardware BIOS Virus protection
|
Management |
Software |
Optional IPMI (Intelligent Platform Management
Interface) v2.0
Super Doctor
III
Watch Dog
NMI
|
Power
Configurations |
ACPI Power Management
Main Switch Override Mechansim
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
CPU Fan Auto-off in Sleep Mode
Power-on mode for AC power recovery
Internal/External modem remote ring-on
Suspend to RAM (STR)
|
PC Health Monitoring |
CPU |
Monitors for CPU Cores, +1.8V, +3.3V,
+5V, -12V & +5V Standby, VBAT
CPU Core 5-Phase-switching voltage regulator
with auto-sense from 0.8375V-1.60V
|
FAN |
Total of eight 4-pin fans
8x fans with status monitoring
Status monitor for speed control
Status monitor for on/off control
Support for 3-pins (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
|
Temperature |
Monitoring for CPU and chassis, environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
PSU I 2 C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
|
LED |
CPU / System Overheat LED
Suspend-state Indicator LED
+5V Standby Alert LED
|
Other
Features |
Chassis intrusion detection
Chassis intrusion header
SDDC Support
|
RoHS
|
RoHS
Compliant 6/6, Pb Free |