| Part Number |
| MBD-BX7DBi+-O |
X7DBi+
(Standard Retail Pack)
|
| Physical Stats |
| Form Factor |
Enhanced
Extended ATX |
| Dimensions |
13" x 13.68" (33cm x 34.7cm) |
| Processor/Cache |
| CPU |
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s)
of the same type below:
- Quad-Core Intel®
Xeon®Processor 5300 sequence (Clovertown processor) up to 2.66 GHz
- Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up
to 3.73 GHz
|
| System
Bus |
1333 / 1066 / 667 MHz system bus |
| Operating
System Software |
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
|
| System Memory |
| Memory
Capacity |
Sixteen 240-pin DIMM sockets
Supports up to 64 GB 667 / 533MHz DDR2
ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Mirroring supported
|
| Memory
Type |
667 /
533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit,
240-pin gold-plated DIMMs |
| DIMM Sizes |
512 MB,
1GB, 2GB, 4GB |
| Memory
Voltage |
1.8V only |
| Error
Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device
Data Correction (SDDC)
|
| On-Board Devices |
| Chipset |
Intel® 5000P (Blackford) chipset
MCH + ESB2
|
| SATA |
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
|
| IPMI |
Support for Intelligent Platform
Management Interface v.2.0
200-pin IPMI slot (SIMLP)
|
| Network
Controllers |
Intel® (ESB2/Gilgal) 82563EB Dual-Port
Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output
Intel® I/OAT support for fast, scaleable,
and reliable networking
|
| Graphics |
ATI ES1000 controller with 16 MB of video memory |
| Super
I/O |
Winbond 83627HG chip |
| Input / Output |
| Serial
ATA |
Six Serial ATA ports
Six SATA hard drives supported
|
| IDE |
Single EIDE channel supports up to two UDMA
IDE devices (IDE-M, IDE-S) including CF(Compact
Flash) Card
Compact Flash (40-pin connector, IDE 1, single
channel) slot
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
1 Floppy controller; 1.44 MB
|
| LAN |
2x RJ45 LAN ports |
| USB |
2x USB rear ports
3x USB internal headers
Total 5 USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
1x VGA
Port |
| Keyboard/Mouse |
PS/2
keyboard and mouse ports |
| Serial
Port/ Header |
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
|
| Parallel
Port |
1 ECP / EEP parallel port |
| Chassis
( Optimized for
X7DBi+
) |
`
| 2U Chassis |
CSE-825TQ-R700LPV |
`
| Tower
/ 4U Rackmount |
CSE-745TQ-R800 |
`
| Important
Chassis Notes |
To ensure system stability, a 700W (minimum) ATX power
supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
| Expansion Slots |
| PCI-Express |
2 (x8) PCI-e (using x16 slots)
3 (x4) PCI-e (using x8 slots)
|
| PCI-X |
1x 64-bit 133MHz PCI-X (3.3V) slots
|
| System BIOS |
| BIOS
Type |
8Mb
Flash EEPROM with Phoenix® BIOS |
| BIOS
Features |
Plug and Play (PnP) SMBIOS 2.3
DMI 2.3
PCI 2.2
ACPI 1.0/2.0
USB Keyboard Support |
| Management |
| Software |
Optional IPMI (Intelligent Platform Management
Interface)
1.5/ 2.0
Super Doctor
III
Watch Dog
NMI
|
| Power
Configurations |
ACPI Power Management
Main Switch Override Mechansim
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal/External modem remote ring-on |
| PC Health Monitoring |
| CPU |
Monitors for CPU
Cores, +1.8V, +3.3V,
+5V, ±12V, +3.3V
Standby, +5V Standby,
VBAT, HT, Memory Voltage,
Chipset Voltage
5-Phase-switching
voltage regulator with
auto-sense from 0.8375V-1.60V
|
| FAN |
Total of four 3-pin
and four 4-pin fan
headers supporting
up to 8 fans
8x fans with tachometer
status monitoring
Status monitor for
speed control
Support 3-pin speed
control
Pulse Width Modulated
(PWM) fan connectors
|
| Temperature |
Monitoring for CPU and chassis
environment
CPU thermal trip support
Thermal Control for 8x fan
connectors
PSU I 2 C temperature sensing
logic
Thermal Monitor 2 (TM2) support
PECI
|
| LED |
CPU / System Overheat LED
Suspend-state indicator LED
|
| Other
Features |
Chassis intrusion detection
Chassis intrusion header
SDDC Support
|
| RoHS |
RoHS Compliant 5/6, Server Exemption
|
