Part Number |
MBD-X7DGT-B |
X7DGT-B
(Bulk Pack) |
Physical Stats |
Form Factor |
• Proprietary
ATX |
Dimensions |
16" x 6.5 " (40.6cm x 16.5cm) |
Processor/Cache |
CPU |
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit
Xeon® processor(s) of the same
type below:
- Quad-Core Intel®
Xeon®Processor 5300 sequence (Clovertown processor) up to 2.66 GHz
- Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up
to 3.73 GHz
|
System
Bus |
1333 / 1066 / 667 MHz system bus |
System Memory |
Memory
Capacity |
Eight 240-pin DIMM sockets
Supports up to 32 GB 667 / 533MHz DDR2 ECC
FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Mirroring supported |
Memory
Type |
667 /
533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit,
240-pin gold-plated DIMMs |
DIMM Sizes |
512 MB, 1GB, 2GB, 4GB |
Memory
Voltage |
1.8V only
1.5V (AMB) |
Error
Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data
Correction (SDDC) |
On-Board Devices |
Chipset |
Intel® 5000X chipset
MCH + ESB2 |
SATA |
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support |
IPMI |
Support for Intelligent Platform
Management Interface v.2.0, v.1.5
200-pin IPMI slot (SIMSO)
(Optional:
AOC-SIMSO ) |
Clock
Generator |
CK410B |
Network
Controllers |
2x Intel® (ESB2/Gilgal) 82563EB Dual-Port
Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output
Intel® I/OAT support for fast, scaleable,
and reliable networking |
Graphics |
ATI ES1000 controller with 16 MB of video memory |
Super
I/O |
bond 83627HF chip |
Input / Output |
Serial
ATA |
Four Serial ATA ports |
LAN |
2x RJ45 LAN ports |
USB |
2x USB rear ports
2x USB internal headers
Total 4 USB 2.0 Compliant |
VGA |
1x VGA
Port |
Serial
Port |
1 Fast
UART 16550 serial port |
Chassis
( Optimized for X7DGT-iNF-B ) |
`
1U |
SC808TQ-980 |
Expansion Slots |
PCI-Express |
1 (x8) PCI-e slots |
System BIOS |
BIOS
Type |
8Mb
Flash EEPROM with Phoenix® BIOS |
BIOS
Features |
Plug and Play (PnP) SMBIOS 2.3
DMI 2.3
PCI 2.2
ACPI 1.0/2.0
USB Keyboard Support |
Management |
Software |
Optional IPMI (Intelligent Platform Management
Interface)
1.5/ 2.0
Super Doctor
III
Watch Dog
NMI |
Power
Configurations |
ACPI Power Management
Main Switch Override Mechansim
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal/External modem remote ring-on |
PC Health Monitoring |
CPU |
Monitors for CPU Cores,+1.5V,
+3.3V, +5V, ±12V,
+3.3V Stdby, +5 Stdby,
VBAT, HT, Memory, Chipset
6-Phase-switching voltage
regulator with auto-sense
from 0.8375V-1.60V |
FAN |
Total of four proprietary
fan headers supporting
up to 8 fans
8x fans with tachometer
status monitoring
Status monitor for speed
control |
Temperature |
Monitoring for CPU and chassis
environment
CPU thermal trip support
Thermal Control for 8x fan
connectors
PSU I 2 C temperature sensing
logic
Thermal Monitor 2 (TM2) support
PECI |
LED |
CPU / System Overheat LED |
Other
Features |
Chassis intrusion detection
Chassis intrusion header
SDDC Support |
RoHS |
RoHS Compliant 5/6, Server Exemption |