Part Number |
MBD-X7SBE-O |
X7SBE (Standard Retail Pack) |
Physical Stats |
Form Factor |
ATX |
Dimensions |
12" x 9.6 ", (30.48cm x 24.38 cm) |
Processor/Cache |
CPU |
Single LGA775 ZIF Socket
Supports a Quad-Core Intel® Xeon® 3300/3200 series processor
Supports a Dual-Core Intel® Xeon® E3100/3000 series processor
Supports an Intel® Core™2 Quad Q9000/Q6000 series processor
Supports an Intel® Core™2 Duo E8000/E6000 series processor
Supports an Intel® Pentium® dual-core E2000 series processor
Supports an Intel® Celeron® 400 series processor |
System
Bus |
1333 / 1066 / 800 MHz system bus |
System Memory |
Memory
Capacity |
Four 240-pin DIMM sockets
Supports up to 8 GB of memory (Dual Channel) |
Memory
Type |
DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs |
DIMM Sizes |
256 MB, 512 MB, 1 GB, 2GB |
Memory
Voltage |
1.8V only |
On-Board Devices |
Chipset |
Intel 3210 chipset
ICH9R + PXH + Intel® 82573V + Intel® 82573L |
SATA |
Intel® ICH9R SATA2 (3 Gbps) controller built-in
RAID 0, 1, 5, 10 support (Windows Only)
RAID 0, 1, 10 support (Linux) |
IPMI |
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
200-pin IPMI slot
(Optional: AOC-SIMLC-HTC)
(Optional: AOC-SIM1U+)-KVM-over-LAN support
NOTE: Must use Dedicated LAN for KVM-over-LAN function |
Network
Controllers |
2x Single-port Gigabit PCI-Express Ethernet Controllers
Intel® 82573V + Intel® 82573L
Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output |
Graphics |
On-board ATI ES1000 (32MB) graphics |
Super
I/O |
Winbond 83627DHG chip |
Input / Output |
Serial
ATA |
Six Serial ATA ports (3 Gbps performance)
Six SATA hard drives supported |
Floppy |
• 1
Floppy controller; 1.44 MB |
LAN |
2x RJ45 LAN ports |
USB |
Up to 7x USB 2.0 / 1.1 compliant ports
2 rear ports
2 internal heades for 4 USB 2.0/1.1 ports + 1 on-board |
VGA |
1x VGA Port |
Keyboard
/ Mouse |
• PS/2
keyboard and mouse ports |
Serial
Ports |
1x Fast UART 16550 serial port
1x internal header |
Chassis ( Optimized for
X7SBE ) |
`
2U |
CSE-822TQ-400LP
(CBL-0062L required) |
`
3U |
CSE-833T-550
(CBL-0062L required) |
`
Mid-Tower |
SC733TQ-465
SC733T-465
SC733i-465
SC733T-645
SC733i-645 |
`
Important Note |
For a general system, a 420W (minimum) ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure system stability]. |
Expansion Slots |
PCI-Express |
1 (x8) PCI-e slot
1 (x4) PCI-e slot
|
PCI-X |
2 64 bit PCI-X 133 Mhz slot
2 64 bit PCI-X 100 Mhz slot |
System BIOS |
BIOS
Type |
16Mb Flash EEPROM with Phoenix BIOS® |
BIOS
Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3 |
Management |
Software |
H/W Monitor in W83627DHF(PECI support)
Super Doctor III
Watch Dog
NMI |
Power
Configurations |
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on
Suspend to RAM(STR)
|
PC Health Monitoring |
CPU |
Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
Adjustable CPU clock frequency ratio
|
FAN |
Total of eight fan headers supporting up to 8 fans
Four 4-pin fan headers
Four 3-pin fan headers
8x fans with tachometer status monitoring
Status monitor for speed control
Support 3-pin fans
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support |
LED |
CPU / System Overheat LED
Suspend-state indicator LED
+5 Standby alert LED
|
Other
Features |
Chassis intrusion detection
Chassis intrusion header |