| Part Number |
| MBD-X7DVL-L-O |
X7DVL-L-O |
| Physical Stats |
| Form Factor |
Proprietary |
| Dimensions |
9.6" x 10" (24.4cm x 25.4cm) |
| Processor/Cache |
| CPU |
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s)
of the same type below:
Quad-Core Intel®
Xeon®Processor 5300 sequence (Clovertown processor) 90 watt or lower
power
Dual-Core Intel®
Xeon®Processor 5100 sequence (Woodcrest processor) 90 watt or lower
power
|
| System
Bus |
1333 MHz, 1066 & 667 MHz system bus |
| System Memory |
| Memory
Capacity |
Four 240-pin DIMM sockets
Supports up to 16 GB 667 / 533MHz DDR2 ECC FB-DIMM
memory
Memory must be populated in pairs
|
| Memory
Type |
667 /
533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit,
240-pin gold-plated DIMMs |
| DIMM Sizes |
256 MB, 512 MB, 1GB, 2GB, 4GB
|
| Memory
Voltage |
1.8 V only |
| Error
Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data
Correction (SDDC)
|
| On-Board Devices |
| Chipset |
Intel® 5000V (Blackford VS) chipset
MCH + ESB2
|
| SATA |
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
|
| Network
Controllers |
Two Intel® (ESB2/Gilgal) 82563EB
Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
|
| Graphics |
XGI Volari Z7 16MB |
| Clock
Generator |
ICS932S401EGLF
|
| Super
I/O |
Winbond 83627HG chip
|
| Input / Output |
| Serial
ATA |
Four Serial ATA ports
Four SATA hard drives supported
|
| IDE |
Single EIDE channel supports up to two
UDMA IDE devices (IDE-M, IDE-S)
Supports UDMA Mode 5, PIO Mode 4, and
ATA/100
|
| Floppy |
• 1
Floppy controller; 1.44 MB |
| LAN |
• 2x
RJ45 LAN ports |
| USB |
2x USB rear ports
1x USB internal headers for 2 ports
Total 4 USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
1x VGA Port |
| Keyboard
/ Mouse |
• PS/2
keyboard and mouse ports |
| Serial
Ports |
• 1
Fast UART 16550 serial ports
• 1 Fast UART 16550 serial header |
| Chassis ( Optimized for X7DVL-L) |
| 1U
Chassis |
CSE-811TQ-520
CSE-811i-520
CSE-512F-520
CSE-512F-520L
|
| Mid-Tower |
CSE-733TQ-645 (MCP-310-00010-01
air shroud required)
CSE-733i-645
|
| Important
Chassis Notes |
To
ensure system stability, a 500W (minimum) ATX power
supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
| Expansion Slots |
| PCI-Express |
1 (x8) PCI-e slot |
| PCI |
1x 32-bit 33MHz PCI (5 V) slots
|
| System BIOS |
| BIOS
Type |
8Mb
Flash EEPROM with Phoenix® BIOS |
| BIOS
Features |
Plug and Play (PnP)
SMBIOS 2.3
DMI 2.3
PCI 2.2
ACPI 1.0
USB Keyboard support
Hardware BIOS Virus protection
|
| Management |
| Software |
Super Doctor
III
Watch Dog
NMI
|
| Power
Configurations |
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote
ring-on
|
| PC Health Monitoring |
| CPU |
Monitors for CPU Cores,+1.8V,
+3.3V, +5V, ±12V,
+3.3V Standby, +5V Standby,
VBAT
4-Phase-switching voltage
regulator
|
| FAN |
Total of five 4-pin and
3-pin fan headers supporting
up to 5 fans
5x fans with tachometer
status monitoring
Status monitor for speed
control
Status monitor for on/off
control
Support 3-pin fans (w/o
speed control)
Low noise fan speed control
Pulse Width Modulated
(PWM) fan connectors
|
| Temperature |
Monitoring for CPU and
chassis environment
CPU thermal trip support
Thermal Control for 5x
fan connectors
PSU I 2 C temperature
sensing logic
Thermal Monitor 2 (TM2)
support
|
| LED |
CPU / System Overheat LED
Suspend-state indicator LED
+5V Standby alert LED
|
| Other
Features |
Chassis intrusion detection
Chassis intrusion header
SDDC Support
|
