SUPERMICRO PDSME+-B DUAL-CORE INTEL 3010 MUKILTEO-2P CHIPSET 1066MHZ FSB DDR2 667 ATX SERVER MOTHERBOARD WITH ON-BOARD VIDEO PCI-EXPRESS DUAL GB LAN IDE SATA 3G/II RAID: MBD-PDSME+-B (BULK PACK OF 10)
Images shown for reference only
SUPERMICRO PDSME+-B DUAL-CORE INTEL 3010 MUKILTEO-2P CHIPSET 1066MHZ  
 
Shipping Extra  
ATACOM Part #:MB77_SUPE_SM_AQ  
   Price: $

 
Specification are for references only
Product SKUs
  • PDSME+-B (Bulk Pack of 10)
  • Physical Stats
    ATX
  • 12" x 9.6", (30.5cm x 24.4 cm)
  • Processor/Cache
    Single LGA775 ZIF Socket
    Supports a Quad-Core Intel® Xeon® 3200 Series processor
    Supports a Dual-Core Intel® Xeon® 3000 Series processor
    Supports a Quad-Core Intel® Core™2 Extreme Series processor
    Supports an Intel® Core™2 Quad Series processor
    Supports an Intel® Core™2 Duo Series processor
    Supports a Dual-Core Intel® Pentium® D processor
    Supports an Intel® Pentium® Extreme Edition processor
    Supports an Intel® Pentium® 4 processor
    Supports an Intel® Celeron® D processor
    1066 / 800 / 533 MHz system bus
    System Memory
  • Four 240-pin DIMM sockets
  • Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
  • DDR2 667/533/400MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
    256 MB, 512 MB, 1 GB, 2GB
  • 1.8 V only
  • On-Board Devices
    Intel 3010 (Mukilteo-2P) chipset
    ICH7R + PXH + Intel® 82573V + Intel® 82573L
    Intel® ICH7R SATA controller built-in (3 Gbps)
    RAID 0, 1, 5, 10 support (Windows Only)
    RAID 0, 1, 10 support (Linux)
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
    Supermicro Intelligement Management
    (Optional: AOC-SIM1U+)
    NOTE: Must use dedicated LAN for IPMI function
    2x Single-port Gigabit PCI-Express Ethernet Controllers
    Intel® 82573V
    Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
  • On-board ATI ES1000 (16MB) graphics
  • Winbond 83627HG chip
  • CK410
  • Input / Output
    Four Serial ATA ports (3 Gbps performance)
    Four SATA hard drives supported
  • One EIDE channel supports up to two UDMA IDE devices
    Supports UDMA Mode 5, PIO Mode 4, and ATA/100
  • 1 Floppy controller; 1.44 MB
  • 2x RJ45 LAN ports
  • Up to 4x USB 2.0 / 1.1 compliant ports
    2 rear ports
    1 internal header for 2 ports
    1x VGA Port
    PS/2 keyboard and mouse ports
    1x Fast UART 16550 serial port
    1x Header
    Chassis ( Optimized for PDSME+ )
    CSE-823T-R500LP
    CSE-823T-550LP
    CSE-823i-550LP
    CSE-742i-450
    CSE-733T-645
    CSE-733T-450
    CSE-733i-645
    CSE-733i-450
    a general system, a 400W (minimum) ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure system stability].
    Expansion Slots
  • 1 (x4) PCI-e slot
    1 (x8) PCI-e slot
  • 2x 64-bit 133MHz PCI-X (3.3V) slots
    2x 64-bit 100MHz PCI-X (3.3V) slots
    System BIOS
    8Mb Flash EEPROM with Phoenix BIOS®
  • Plug and Play (PnP)
    DMI 2.3 support
    PCI 2.2
    ACPI 1.0
    SMBIOS 2.3
    USB Keyboard support
  • Management
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
    Super Doctor III
    Watch Dog
    NMI
  • ACPI Power Management
    Main Switch Override Mechanism
    Wake-On-Ring (WOR) header
    Wake-On-LAN (WOL) header
    Keyboard Wakeup from Soft-Off
    CPU Fan auto-off in sleep mode
    Power-on mode control for AC power loss recovery
    Internal/External modem remote ring-on
    Suspend to RAM (STR)
    PC Health Monitoring
    Monitors for CPU Cores (+1.5V, +1.8V, +3.3V, +5, ±12V, +5V Standby, VBAT)
    CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
  • Total of six 4-pin fan headers
    6x fans with tachometer monitoring
    Status monitor with firmware / software speed control
    Status monitor for on/off control
    Support 3-pin fans (with speed control)
    Low noise fan speed control
    Pulse Width Modulated (PWM) fan connector
  • Monitoring for CPU and chassis environment
    CPU Thermal Trip support
    Thermal Monitor (TM2) Support
    CPU / System Overheat LED
    Standby alert LED
    Suspend-state indicator LED
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
  • 1. Intel® Xeon® 3200 Series,
    Xeon® 3000 Series, Core™2 Extreme,
    Core™2 Quad, Core™2 Duo,
    Pentium® D, Pentium Extreme Edition,
    Pentium 4 & Celeron D in LGA775
    Package (FSB 1066/800/533)
    2. Intel® 3010 (Mukilteo-2P) Chipset
    3. Up to 8GB unbuffered ECC / non-ECC
    DDR2 667/533 SDRAM
    4. Intel® 82573V + Intel® 82573L
    PCI-e Gigabit Controllers (2x LAN Ports)
    5. Built-in SATA Controller
    4x SATA (3Gbps) Drive Support
    6. 1 (x4) & 1 (x8) PCI-Express
    2x 64-bit 133MHz PCI-X
    2x 64-bit 100MHz PCI-X
    7. On board ATI ES1000 16MB Graphics 8. IPMI 2.0 (Virtual Media Over LAN or
    Optional KVM Over LAN)
     



    Graphic Fanless Compact Engine
    Jetway JBC361F35-T40E-B


    Jetway JBC371F35W-T40E-B
    Fanless Graphic Compact Engine


    4 HDMI Ports (Optional 10 HDMI Ports)
    Jetway NF83 AMD Motherboard


    Jetway HBJC128F83-B Digital Signage