Product SKUs |
MBD-PDSBA-B |
PDSMI+-O (Retail Pack) |
Physical Stats |
Form Factor |
• ATX
|
Dimensions |
12.0" width x 9.6 " length , (30.5cm x 24.4cm),
6 layers |
Processor/Cache |
CPU |
Single LGA775 ZIF Socket
Supports an Intel® Pentium® D (Smithfield
Dual Core) processor up to 3.2GHz
Supports an Intel® Pentium® Extreme
Edition processor
Supports an Intel® Pentium® 4 processor
up to 3.8GHz
Supports an Intel® Pentium® 4 Extreme
Edition processor up to 3.72GHz
Supports an Intel® Celeron® D processor
with 256KB L2 Cache up to 3.06GHz
Hyper-Threading (HT) capable
2MB / 1MB L2 Cache
|
System Bus |
• 1066 / 800 / 533 MHz system bus |
System Memory |
Memory Capacity |
Four 240-pin DIMM sockets
Supports up to 8 GB of memory (Single / Dual
Channel)
|
Memory Type |
• DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs |
DIMM Sizes |
• 256 MB, 512 MB, 1 GB, 2GB
|
Memory Voltage |
1.8
V only
|
On-Board Devices |
Chipset |
Intel 3000 (Mukilteo-2) chipset
ICH7R + PXH-V + Intel® 82573V + Intel® 82573L
|
Serial ATA |
Intel® ICH7R SATA controller built-in
RAID 0, 1, 5, 10
|
Network Controllers |
1x Intel® 82573V Gigabit PCI-Express
Ethernet
1x Intel® 82573L Gigabit PCI-Express
Ethernet
Supports 10Base-T, 100Base-TX, 1000BASE-T,
RJ45 output
|
VGA |
On-board
ATI ES1000 16MB graphics |
Super I/O |
Winbond 83627EHG chip
|
Clock Generator |
CK410 |
Input / Output |
Serial ATA |
Four Serial ATA ports (3 Gbps performance)
Four SATA hard drives supported
|
IDE |
One EIDE channel supports up to two UDMA IDE
devices
IDE Master / Slave 2 ports
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
White Connector for Compact Flash (CF, 40-pin
IDE connector) card only
|
Floppy |
1 Floppy controller; 1.44 MB
|
LAN |
2x
RJ45 LAN ports |
USB |
Up to 6x USB 2.0 compliant / 1.1 compatible
ports
4x Internal USB headers
2x Rear USB ports
|
VGA |
• 1x VGA Port
|
Keyboard / Mouse |
• PS/2 keyboard and mouse ports
|
Serial Ports |
• 1x Fast UART 16550 serial port
• 1x Header
|
Parallel Port |
• 1x ECP / EEP Parallel Header
|
Chassis ( Optimized for PDSMI-LN4+
) |
1U |
SC512F-260
SC513F-260
SC811T-300
SC813MFT-300C
|
Mid-Tower |
SC733T-645
SC733i-645
SC733T-450
SC733i-450
|
Important Note |
Only Supermicro 1U chassis is recommended for
1U Building Block Solutions |
Expansion Slots |
Universal
Slot |
1 (x8) PCI-Express Slot (via Riser Card) OR
1x 64-bit PCI-X 133MHz Slot (via Riser Card)
|
PCI |
1x 32-bit 33MHz PCI (5V) slot
|
System BIOS |
BIOS Type |
8Mb Flash
EEPROM with Phoenix BIOS® |
BIOS Features |
Plug and Play (PnP)
DMI 2.3 support
PCI 2.2
ACPI 1.0
SMBIOS 2.3
USB Keyboard support
|
Management |
Software |
Optional IPMI (Intelligent Platform Management
Interface) 2.0
Super Doctor
III
Watch Dog
NMI |
Power Configurations |
ACPI/APM Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode control for AC power loss recovery
Internal / External Modem Rign-on
|
PC Health Monitoring |
CPU |
Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V,
+3.3V/+5V Standby, VBAT)
CPU Core 4-Phase-switching voltage regulator
with auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio
|
FAN |
Fan Speed Control
Total of six 4-pin fan headers
6x fans with tachometer monitoring
Status monitor with firmware speed control
Low noise fan speed control
Status monitor for on/off control
Support 3-pin fans (without speed control)
Pulse Width Modulated (PWM) fan connector
|
Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor (TM2) Support
|
LED |
CPU / System Overheat LED
+5V Standby Alert LED
Suspend-state indicator LED
|
Other Features |
Chassis Intrusion Detection
Chassis Intrusion Header
|