Product SKUs |
MBD-H8DAE-B |
•
H8DAE (Bulk) |
Physical Stats |
Form Factor |
• Extended ATX
|
Dimensions |
• 12" x 13.05" (30.5cm x 33.2cm)
|
Processor/Chipset |
CPU |
• Dual 940-pin ZIF Sockets
• Supports up to two Dual-Core AMD Opteron™ 200 Series
processor(s)
• VRM x3
|
Chipset |
• AMD 8131 HyperTransport PCI-X Tunnel
• AMD 8111 HyperTransport I/O Hub
|
System Memory |
Memory Capacity |
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR 400 MHz memory or
• Supports up to 16 GB DDR 333 MHz memory or
• Supports up to 32 GB DDR 266 MHz memory
• Single or Dual (recommended) channel memory support
• For Single CPU: Memory must be populated in CPU
I DIMMs only
• For Dual CPUs: Recommended that memory be populated
equally in adjacent memory banks
|
Memory Type |
• DDR 400/333/266MHz buffered (registered) ECC SDRAM
72-bit, 184-pin gold-plated DIMMs
|
DIMM Sizes |
• 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
Memory Voltage |
• 2.5 V only
|
Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
|
On-Board Devices |
IPMI |
• 1U support for Intelligent Platform Management
Interface v.2.0 ( Optional:
1UIPMI-B )
• 2U, 3U, 4U support for Intelligent Platform Management
Interface v.2.0, Low Profile ( Optional: AOC-LPIPMI
)
• RMM (Remote Management Module)
• (Card not included)
|
Network Controllers |
• Broadcom® 5704 Dual Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output
|
VGA |
• ATI Rage XL 8MB PCI Graphics Controller
|
Input / Output |
IDE |
• Dual ATA 133/100 EIDE channels support up to four
UDMA IDE devices
|
Floppy |
• 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
|
LAN |
• 2 RJ45 LAN ports
|
USB |
• FUCI
• Up to 5 USB Ports 1.1 Compliant
|
Keyboard / Mouse |
• PS/2 keyboard and mouse ports
|
Serial Ports |
• 2 Fast UART 16550 serial ports
|
Chassis ( Optimized
for H8DAE ) |
2U Chassis |
• SC823i-550LP
|
Rackmount Tower
/ 4U |
• SC743i-R760
• SC743i-650
|
Important Chassis
Notes |
• To ensure system stability, a 420W (minimum) ATX
power supply
[ 8-pin (+12V) and 24-pin are required]
|
Expansion Slots |
PCI-X |
• 2 64-bit 133/100MHz PCI-X (3.3V) slots
• 2 64-bit 66MHz PCI-X (3.3V) slots
|
PCI |
• 2 32-bit 33MHz PCI (5V) slots
|
IPMI |
• IPMI 2.0 expansion slot
|
System BIOS |
BIOS Type |
• 4Mb Flash EEPROM with AMI® BIOS
|
BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.3
• ACPI 2.0
• Fan Speed Control
|
Management |
Software |
• Optional IPMI (Intelligent Platform Management
Interface) 2.0
• Super Doctor
III
• Watch Dog
|
Power Configurations |
• ACPI/API Power Management
• Wake-On-LAN (WOL) header
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on
|
PC Health Monitoring |
CPU |
• Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V
Standby, +5V Standby, HyperTransport voltage 1.2V,
memory voltage 2.5V, DDR termination 1.25V, chipset
voltage 1.8V
• Up to 8 fan status
• Supports System Management Utility
|
FAN |
• Total up to 8-fan status
• 3-pin fan speed control or
• 4-pin Pulse Width Modulated (PWM) fan connector
|
Temperature |
• Monitoring for CPU and chassis environment
|
LED |
• Overheat LED
|
Other Features |
• Chassis Intrusion Header
|