Product SKUs |
H8QMi-2-O |
H8QMi-2 (Standard Retail Pack) |
Physical Stats |
Form Factor |
Proprietary |
Dimensions |
16.4" x 13" (41.7cm x 33.0cm) |
Processor/Cache |
CPU |
Quad 1207-pin Socket F
Supports up to four Quad-Core / Dual-Core AMD Opteron™ 8000 Series (Socket F) processor(s) |
System Bus |
1000MHz HyperTransport |
System Bus |
nVidia MCP55 Pro
IO 55
NEC uPD720400 |
System Memory |
Memory Capacity |
Thirty-two 240-pin DIMM sockets
Supports up to 128 GB DDR2 667/533/400 MHz memory *
Single or Dual (recommended) channel memory support
For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks |
Memory Type |
DDR2 667/533/400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes |
256MB, 512MB, 1GB, 2GB, 4GB |
Memory Voltage |
• 1.8 V only |
On-Board Devices |
SATA |
nVidia MCP55 Pro SATA2 3.0Gbps Controller
6 SATA2 Ports
nVidia RAID 2.0
SATA RAID 0, 1, 0+1, 5 JBOD Support
|
IPMI |
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot
(Optional: AOC-SIMLC(+) R 3.00)
(Optional: AOC-SIM1U(+) R 3.00)
RMM (Remote Management Module)
(Card not included)
Note: Dedicated LAN connection is required for KVM-over-LAN function.
|
Network
Controllers |
Intel® 82546GB Dual Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Super
I/O |
Winbond 83627HG |
VGA |
ATI ES1000 Graphics Controller
16MB Graphics & VGA port |
Input / Output |
SATA |
6 SATA2 ports |
IDE |
Single EIDE channel support up to two UDMA IDE devices
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA 100 / 133
|
Floppy |
1 Floppy port; 1.44 MB support |
LAN |
2 RJ45 LAN ports |
USB |
Up to 4 USB Ports 2.0/1.1 Compliant
2 Rear Ports
2 Internal Headers |
VGA |
1 VGA
port |
Keyboard
/ Mouse |
PS/2 keyboard and mouse ports |
Serial
Ports |
1 Fast UART 16550 serial port
1 Header |
Chassis (
Optimized for
H8QMi-2
) |
Chassis 2U |
CSE-828TQ-R1200LP
Required: Heat sink (SNK-P0023P+)
|
Rackmount Tower / 4U |
CSE-748TQ-R1200 (OEM only)
Required: Heat sink (SNK-P0023P+) &
Airshroud (MCP-310-74802-0B)
|
Important Note |
To ensure system stability, a 1200W (minimum) ATX power supply
[ 8-pin & 8-pin (+12V) and 24-pin are required] |
Expansion Slots |
PCI-Express |
2 x16 PCI-e Slots
1 x8 PCI-e Slot
1 x4 PCI-e Slot (Using x8 Slot)
|
PCI-Express |
1 64-bit 133 MHz PCI-X (3.3V) slots |
System BIOS |
BIOS Type |
8Mb Flash EEPROM with AMI® BIOS
SST 49LF080A BIOS Chip |
BIOS Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 2.0/1.0
USB Keyboard Support
SMBIOS 2.3 |
Management |
Software |
Optional IPMI (Intelligent Platform Management Interface) 2.0
Super Doctor III
Watch Dog |
Power Configurations |
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) headert
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on |
PC Health Monitoring |
CPU |
Monitors CPU Core Voltages, +3.3V, +5V, +12V, +5V Standby, VBAT.
CPU switching voltage regulator |
FAN |
Total up to 9-fan status tachometer monitoring
Up to nine 3-pin fan headers
Status monitor for speed control
Support 3-pin fans with fan-speed control
Low noise fan speed control |
Temperature |
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
PC Temperature Sensing Logic |
LED |
CPU / System Overheat LED
+5V Standby Alert LED |
Other Features |
Chassis Intrusion Detection
Chassis Intrusion Header |