Product SKUs |
H8QM3-2+-O |
H8QM3-2+ (Standard Retail Pack) |
Physical Stats |
Form Factor |
Proprietary |
Dimensions |
16.4" x 13" (41.7cm x 33.0cm)
|
Processor/Cache |
CPU |
Quad 1207-pin Socket F
Supports up to four Quad-Core / Dual-Core AMD Opteron™ 8000 Series (Socket F) processor(s)
|
System Bus |
1000MHz HyperTransport |
System Bus |
nVidia MCP55 Pro
NEC uPD720400
|
System Memory |
Memory Capacity |
Thirty-two 240-pin DIMM sockets
Supports up to 128 GB DDR2 667/533/400 MHz memory *
Single or Dual (recommended) channel memory support
For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
|
Memory Type |
DDR2 667/533/400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes |
256MB, 512MB, 1GB, 2GB, 4GB **
|
Memory Voltage |
• 1.8 V only |
On-Board Devices |
SAS |
LSI SAS1068E
RAID 0, 1, 10 support
(Optional: AOC-IButton68) RAID 5 support
|
SATA |
nVidia MCP55 Pro SATA2 3.0Gbps Controller
6 SATA2 Ports
nVidia RAID 2.0
SATA RAID 0, 1, 0+1, 5 JBOD Support
|
IDE |
Single EIDE channel
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA/100/133 |
IPMI |
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot
(Optional: AOC-SIMLC(+) R 3.00)
(Optional: AOC-SIM1U(+) R 3.00)
RMM (Remote Management Module)
(Card not included)
Note: Dedicated LAN connection is required for KVM-over-LAN function.
|
Network
Controllers |
Intel® 82546GB Dual Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
VGA |
ATI ES1000 Graphics Controller |
Super
I/O |
Winbond 83627HG
|
Input / Output |
SAS |
8 SAS / SATA ports |
SATA |
6 SATA2 ports
|
IDE |
Single EIDE channel support up to two UDMA IDE devices
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA 100 / 133
|
Floppy |
1 Floppy port; 1.44 MB support |
LAN |
2 RJ45 LAN ports |
USB |
Up to 4 USB Ports 2.0/1.1 Compliant
2 Rear Ports
2 Internal Headers
|
VGA |
1 VGA
port |
Keyboard
/ Mouse |
PS/2 keyboard and mouse ports |
Serial
Ports |
1 Fast UART 16550 serial port
1 Header
|
Chassis (
Optimized for
H8QM3-2+
) |
1U Chassis |
CSE-818TQ+-1000LP (OEM only)
CPU Heatsink SNK-P0022+ is required (Heatsink sold separately) |
Important Note |
To ensure system stability, a 1000W (minimum) ATX power supply
[ 8-pin & 8-pin (+12V) and 24-pin are required] |
Expansion Slots |
PCI-Express |
1 x16 PCI-e Slot |
System BIOS |
BIOS Type |
8Mb Flash EEPROM with AMI® BIOS
SST 49LF080A BIOS Chip
|
BIOS Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 2.0/1.0
USB Keyboard Support
SMBIOS 2.3
|
Management |
Software |
Optional IPMI (Intelligent Platform Management Interface) 2.0
Super Doctor III
Watch Dog
|
Power Configurations |
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) headert
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on
|
PC Health Monitoring |
CPU |
Monitors CPU Core Voltages, +3.3V, +5V, +12V, +5V Standby, VBAT.
CPU switching voltage regulator
|
FAN |
Total up to 9-fan status tachometer monitoring
Up to nine 3-pin fan headers
Status monitor for speed control
Support 3-pin fans with fan-speed control
Low noise fan speed control
|
Temperature |
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
PC Temperature Sensing Logic
|
LED |
CPU / System Overheat LED
+5V Standby Alert LED
|
Other Features |
Chassis Intrusion Detection
Chassis Intrusion Header
|