Model
|
Brand
|
Supermicro |
SYS-6025W-URB |
SuperServer 6025W-URB (Black) |
Motherboard |
Motherboard |
Super X7DWU |
Processor/Cache |
CPU |
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
System Bus |
1600/1333 / 1066 MHz system bus |
System Memory (per Node) |
Memory Capacity |
Eight 240-pin DIMM sockets
Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported |
Memory Type |
800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes |
256MB, 512MB, 1GB, 2GB, 4GB, 8GB** |
Memory Voltage |
1.8 V or 1.5 V |
Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices (per Node) |
Chipset |
Intel® 5400 (Seaburg) chipset
MCH + ESB2 |
SATA |
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
|
IPMI |
Support for Intelligent Platform Management Interface v.2.0 / 1.5
200-pin IPMI slot (SIMSO(+))
For Dedicated LAN, cable CBL-0177L must be used (cable sold separately) |
Network Controllers |
Intel® 82575EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking |
Graphics |
ATI ES1000 controller with 32 MB of video memory |
Super I/O |
Winbond 83627HF chip |
System BIOS |
BIOS Type |
16Mb SPI Flash with Phoenix ® BIOS |
BIOS Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3 |
Dimensions
|
Dimensions (H x W x D) |
3.5" x 17.2" x 25.5 " |
Front Panel
|
Buttons |
Power On/Off button
System Reset button |
LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
• Power fail LED |
Drive Bays |
Hot-swap |
8x 3.5"SATA Hot-swap drive trays
Supports up to 6x SATA hard drives |
Input / Output |
Serial ATA |
Six Serial ATA ports
Six SATA hard drives supported |
LAN |
2x RJ45 LAN ports |
USB |
2x USB rear ports
3x USB internal headers
Total 5 USB 2.0 Compliant / 1.1 Compliant |
VGA |
1x VGA Port |
Serial Port / Header |
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header |
Power Supply |
PSU |
700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC |
AC Input |
100 - 240V, 60-50Hz, 10 - 4 Amp
|
+5V sb |
4 Amp |
+12V |
57 Amp |
+5V |
30 Amp |
+3.3V |
24 Amp |
-12V |
0.6 Amp |