| Model
|
| Brand
|
Supermicro |
| SYS-6025C-URB |
SuperServer 6025C-URB (Black) |
| Processor/Cache |
| Motherboard |
Super X7DCU |
| Processors |
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
| System Bus |
1333 / 1066 MHz system bus |
| System Memory |
| Memory Capacity |
Six 240-pin DIMM sockets
Supports up to 48GB 667/533MHz DDR2 ECC Register SDRAM
Dual channel memory bus
Memory must be populated in pairs
|
| Memory Type |
667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Size |
1GB, 2GB, 4GB, 8GB**
|
| Memory Voltage |
1.8 V only |
| Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| Chipset |
Intel® 5100 (San Clemente) chipset
ICH9R |
| SATA |
Intel ICH9R SB SATAII Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
|
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 / 1.5
200-pin IPMI slot (SIMSO(+))
|
| Nerwork Controllers |
Intel® 82575EB Dual-port Gigabit Ethernet Controller w/ IOAT
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
ATI ES1000 controller with 32 MB of video memory
|
| Super I/O |
Winbond 83627HF chip |
| Clock Generator |
CK505 chip |
| Input / Output |
| Serial ATA |
Six Serial ATA ports
Six SATA hard drives supported
|
| IDE |
Single EIDE channel supports up to two UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
1 Floppy controller; 1.44 MB, 2.88 MB |
| LAN |
2x RJ45 LAN ports |
| USB |
2 rear + 1 Type A connector + 2 headers (3 Ports)
6 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA |
1x VGA Port |
| Serial Port/ Header |
1 Fast UART 16550 serial port |
| System BIOS |
| BIOS Type |
16Mb SPI Flash with Phoenix ® BIOS |
| BIOS Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0/3.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.3
|
| Chassis |
| Form Factor |
2U Rackmount |
| Model |
SC825TQ-R700U |
| Dimensions
|
| H x W x D |
3.5" x17.2" x25.5 " |
| Gross Weight |
55 lbs (24.9kg) |
| Front Panel |
| Buttons |
Power On/Off button
System Reset button |
| LEDs |
Power LED
Hard drive activity LED
2x Network activity LEDs
Universal Information (UID) LED |
| Ports |
2x USB Ports + DB9 COM Port (optional) |
| Expansion Slots |
| Left Side |
1 Universal I/O (UIO) Slot
3 (x8) PCI-E Slots (Full-height / Full-length)
|
| Right Side |
2 (x4) PCI-E Slots (Low-Profile)
1 64-bit 133MHz PCI-X (3.3V) slot
|
| Drive Bays |
| Hot-swap |
8x 3.5"SATA Hot-swap drive trays
Supports up to 6x SATA hard drives
|
| Backplane
|
| SATA Backplane |
1x 2U SATA backplane |
| Peripheral Drives |
| DVD-ROM |
Slim 8x DVD, 24x CD, DVD-ROM Drive |
| Floppy |
Slim 1.44MB Floppy Drive (Optional) |
| System Cooling |
| Fans |
3x 80mm 6300 RPM fans |
| Shroud |
1x Air Shroud |
| Power Supply |
| Power Supply |
700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC |
| AC Input |
100 - 240V, 60-50Hz, 10 - 4 Amp |
| +5V |
30 Amp |
| +5V standby |
4 Amp |
| +12V |
57 Amp |
| -12V |
0.6 Amp |
| +3.3V |
24 Amp |
