Model
|
Brand
|
Supermicro |
SYS-7045A-CTB |
SuperServer 7045A-CTB (Black) |
Processor/Cache |
Motherboard |
Super X7DCA-i |
Processors |
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence (Harpertown
/Clovertown processor)
up to3.16 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
System Bus |
1333 / 1066 MHz system bus |
System Memory |
Memory Capacity |
Six 240-pin DIMM sockets
Supports up to 48GB 667/533MHz DDR2 ECC Register memory
Memory must be populated in pairs
|
Memory Type |
667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Size |
512 MB, 1GB, 2GB, 4GB, 8GB** |
Memory Voltage |
1.8V only |
Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
On-Board Devices |
Chipset |
Intel® 5100 (San Clemente) chipset
Intel® ICH9R + PXH-V
|
SATA |
Intel ICH9R SB SATAII Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
|
IPMI |
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot (SIMLP)
|
Nerwork Controllers |
Intel® Dual 82573V/L Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
|
Audio |
High Definition 7.1 Channel Audio |
Super I/O |
Winbond 83627DHG chip |
Clock Generator |
CK505 chip |
Input / Output |
Serial ATA |
Six Serial ATA ports
Six SATA hard drives supported
|
IDE |
Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy |
1 Floppy controller; 1.44 MB |
LAN |
2x RJ45 LAN ports |
USB |
4x USB rear ports
6x USB internal header
10 total USB ports, 2.0 Compliant
|
Audio |
High Definition 7.1 Channel Audio
Line-in / Line-out / Microphone Ports
|
Serial Port/ Header |
1 Fast UART 16550 serial port
1 Header
|
System BIOS |
BIOS Type |
8Mb Flash EEPROM with Phoenix® BIOS |
BIOS Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0
ACPI 1.0 (limited)
USB Keyboard support
Hardware BIOS Virus protection
|
Chassis |
Form Factor |
4U Rackmountable / Tower
Optional Rackmount Kit (CSE-PT26)
|
Model |
SC743TQ-865-SQ |
Dimensions
|
H x W x D |
7.0" x17.2" x25.5 " |
Gross Weight |
63 lbs (28.6kg) |
Front Panel |
Buttons |
Power On/Off button
System Reset button |
LEDs |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Fan Fail LED |
Ports |
2x USB Ports |
Expansion Slots |
PCI-Express |
1 (x16) PCI-e slot
1 (x4) PCI-e (using x16) slot
|
PCI-X |
2x 64-bit 133/100MHz PCI-X (3.3V) slots |
PCI |
2x 32-bit 33MHz PCI (5V) slots |
Drive Bays |
Hot-swap |
6x SATA Hot-swap Drives
2x Spare Trays
|
Peripheral Bay(s) [90o Rotatable] |
2x 5.25" Peripheral Drive Bay
1x 5.25" Bay For Floppy Drive
|
Backplane
|
SATA Backplane |
SC743 SATA Backplane w/ Enclosure Management |
Peripheral Drives |
Floppy |
nasonic 3.5" 1.44MB Floppy Drive |
System Cooling |
Fans |
2x 8cm Hot-swappable PWM Cooling Fans
1x 9cm Hot-Swappable Rear Exhaust PWM Fan
2x Active heatsink w/ heatpipe
|
Shroud |
N/A |
Power Supply |
Power Supply |
865W AC power supply w/ PFC |
AC Input |
100 - 240V, 50-60Hz, 12-6 Amp |
+5V |
70 Amp |
+5V standby |
30 Amp |
+12V |
70 Amp |
-12V |
1 Amp |
+3.3V |
30 Amp |