SUPERMICRO SYS-7045B-TR+B 4U XEON 1333FSB FB-DIMM 6XSATA HDD 800W LGA771 HIGH EFFICIENCY REDUNDANT POWER SUPPLY (BLACK)
(Actual Color: Black)
Images shown for reference only
SUPERMICRO SYS-7045B-TR+B  
 
Shipping Extra  
ATACOM Part #: SYI4_SUPE_D4_03  
   Price: $1129.68

 

SuperServer 7045B-TR+B (Black)
Super X7DBE+
  • Dual 771-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
  • Dual-Core Intel® Xeon® Processor5100/ 5000 sequence (Woodcrest/Dempsey processor) with 2MB L2 Integrated Advanced Transfer Cache per core, 4MB L2 cache total, up to 3.73 GHz
  • NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors
  • 1333 / 1066 / 667 MHz system bus
  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems
  • Sixteen 240-pin DIMM sockets
  • Supports up to 64 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
  • Dual branch memory bus
  • Memory must be populated in pairs
  • 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • 512 MB, 1GB, 2GB, 4GB
  • 1.8 V only
  • 1.5V(AMB)
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
  • Intel® 5000P (Blackford) chipset
  • MCH + PXH + ESB2
  • Intel ESB2 SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
  • Support for Intelligent Platform Management Interface v.2.0
  • 200-pin IPMI slot (SIMLP)
  • (Optional: AOC-SIMLP-B)
  • Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT support for fast, scaleable, and reliable networking
  • ATI ES1000 controller with 16 MB of video memory
  • Winbond 83627HF chip
  • Six Serial ATA ports
  • Six SATA hard drives supported
  • Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
  • Compact Flash (40-pin connector, IDE 1, single channel) slot
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
  • 1 Floppy controller; 1.44 MB, 2.88 MB
  • 2x RJ45 LAN port
  • 2x USB rear ports
  • 3x USB internal headers
  • Total 5 USB 2.0 Compliant / 1.1 Compliant
  • 1x VGA Port
  • PS/2 keyboard and mouse ports
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
  • 1 ECP / EEP parallel port
  • 4U Rackmountable / Tower
  • Optional Rackmount Kit (CSE-PT26)
  • SC745TQ-R800
  • 7.0" (177mm)
  • 17.1" (434mm)
  • 25.5" (647mm)
  • 63lbs (28.61kg)
  • Beige, Black
  • Power On/Off button
  • System Reset button
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat / Fan Fail LED
  • Power Fail LED
  • 2x USB Ports
  • 8x Hot-swap Drive Bays
  • Supports up to 6x SATA Hard Drives
  • 2x 5.25" Peripheral Drive Bay
  • 1x 5.25" Bay For Floppy Drive
  • Panasonic 3.5" 1.44MB Floppy Drive
  • 2 (x8) PCI-e slots
  • 1 (x4) PCI-e (using x8) slot
  • 2x 64-bit 133MHz PCI-X (3.3V) slots
  • 1x 64-bit 100MHz PCI-X (3.3V) slot
  • SATA Backplane w/ Enclosure Management
  • 3x 5000 RPM Hot-Swappable Cooling Fans
  • 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
  • 1x Air Shroud
  • 800W AC power supply w/ PFC
  • 100 - 240V, 50-60Hz, 10-4 Amp
  • 30.0 Amp
  • 4 Amp
  • 66 Amp
  • 0.6 Amp
  • 24 Amp
  • Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
  • Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
  • 8x fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x fan connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • CPU / System Overheat LED
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • 8Mb Flash EEPROM with Phoenix® BIOS
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • DMI 2.1
  • PCI 2.2
  • ACPI 1.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
    Tower/4U Dual-Core Xeon® 5000 Sequence SuperServer
    Powered by the latest dual-core Xeon 5000/5100® sequence processors with up to 64GB of FB-DIMM memory support, the SuperServer 7045 series offer versatility in either a tower or rack mount 4U form factor and support enterprise-class SAS/SCSI/SATA drives. Designed with 100% cooling redundancy via a combination of high-performance fans and a custom-designed air-shroud, the probability of downtime or performance reduction is greatly reduced.

    Key Features
  • Dual Intel® 64-bit Xeon® Dual-Core, 667 / 1066 / 1333 MHz FSB
  • Up to 64GB 667/533MHz DDR2 ECC FB-DIMM (Fully Buffered DIMM)
  • 2 (x8) & 1 (x4) PCI-Express, 2x 64-bit 133MHz PCI-X, 1x 64-bit 100MHz PCI-X
  • Intel® (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet Controllerr
  • 8 x 1" Hot-swap Drive Bays
  • 800W High Efficiency Redundant Power Supply
  • Tower or Rackmount
  •  



    Graphic Fanless Compact Engine
    Jetway JBC361F35-T40E-B


    Jetway JBC371F35W-T40E-B
    Fanless Graphic Compact Engine


    4 HDMI Ports (Optional 10 HDMI Ports)
    Jetway NF83 AMD Motherboard


    Jetway HBJC128F83-B Digital Signage