Model
|
Brand
|
Supermicro |
SYS-7045A-C3B |
SuperServer 7045A-C3B (Black) |
Motherboard |
Motherboard |
Super X7DCA-3 |
Processor/Cache |
CPU |
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence
(Harpertown
/Clovertown processor)
up to 3.16 GHz
- Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale
/Woodcrest/Dempsey processor) up to 3.40 GHz
|
System Bus |
1333 / 1066 MHz system bus |
Operating System Software |
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems |
System Memory |
Memory Capacity |
Six 240-pin DIMM sockets
Supports up to 48GB 667/533MHz DDR2 ECC Registered memory
Memory must be populated in pairs |
Memory Type |
667/533MHz Registered DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes |
512MB, 1GB, 2GB, 4GB, 8GB |
Memory Voltage |
1.8V |
Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
On-Board Devices |
Chipset |
Intel® 5100 (San Clemente) chipset
Intel®ICH9R + PXH-V |
SAS |
- LSI SAS1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
SATA |
Intel ICH9R SB SATAII Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
|
IPMI |
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot (SIMLP)
(Optional: AOC-SIMLP-B)
(Optional: AOC-SIMLP-3) with 3rd LAN support
NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
|
Network Controllers |
Intel® Dual 82573V/L Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
|
Super I/O |
Winbond 83627DHG chip |
Clock Generator |
CK505 chip |
Expansion Slots |
PCI-Express |
1 (x16) PCI-e slot
1 (x4) PCI-e (using x16) slot
|
PCI-X |
2x 64-bit 133/100MHz PCI-X (3.3V) slots |
PCI |
2x 32-bit 33MHz PCI (5V) slots |
Input / Output |
SAS |
8 SAS / SATA ports |
Serial ATA |
Six Serial ATA ports
Six SATA hard drives supported
|
IDE |
Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy |
1 Floppy controller; 1.44 MB |
LAN |
2x RJ45 LAN ports |
USB |
4x USB rear ports
6x USB internal header
10 total USB ports, 2.0 Compliant
|
Audio |
High Definition 7.1 Channel Audio
Line-in / Line-out / Microphone Ports
|
Serial Port / Header |
1 Fast UART 16550 serial port
1 Header
|
Parallel Port |
1x ECP / EEP Parallel Port
|
Chassis
|
Form Factor |
4U Rackmountable / Tower
Optional Rackmount Kit (CSE-PT26)
|
Model |
SC743TQ-865-SQ |
Dimensions |
Dimensions |
7" x 17.2" x 25.5" |
Front Panel |
Buttons |
Power On/Off button
System Reset button
|
LEDs |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Fan Fail LED
|
Ports |
2x USB Ports
|
Drive Bays |
Hot-swap |
8x SAS Hot-swap Drives |
Peripheral Bay(s) [90o Rotatable] |
2x 5.25" Peripheral Drive Bay
1x 5.25" Bay For Floppy Drive
|
Peripheral Drives |
Floppy |
Panasonic 3.5" 1.44MB Floppy Drive
|
Backplane |
SAS / SATA Backplane |
SC743 SAS / SATA Backplane w/ Enclosure Management |
System Cooling |
Fans |
2x 8cm Hot-swappable PWM Cooling Fans
1x 9cm Hot-Swappable Rear Exhaust PWM Fan
2x Active heatsink w/ heatpipe
|
Power Supply |
Power Supply |
865W AC power supply w/ PFC |
AC Voltage |
100 - 240V, 50-60Hz, 12-6 Amp |
+5V standby |
6.5 Amp |
+12V |
70 Amp |
+5V |
30 Amp |
+3.3V |
30 Amp |
-12V |
1 Amp |