SUPERMICRO SUPERBLADE SBE-710E-D28 7U 10 BLADE SLOTS/ 2 x 1400W PSU

Images shown for reference only
Color: Black

SUPERMICRO SUPERBLADE SBE-710E-D28 7U 10 BLADE SLOTS/ 2 x 1400W PSU

Shipping Extra

ATACOM Part #: SYIB_SUPE_BS_05

Price: $

Model
Brand	Supermicro
SBE-710E-D28	Enclosure chassis with two 1400W power supplies
Processor Blade	Up to 10 hot-plug processor blades
Module Support	Supports both Intel and AMD based blades
LED	Power LED, Fault LED
InfiniBand Switch	One hot-plug 4x DDR IB switch
Gigabit Ethernet Pass-Through Module	Up to two hot-plug Gigabit Ethernet switches
Management Module	Up to two hot-plug management modules providing remote KVM and IPMI 2.0 functionalities One management module comes standard with each enclosure
Power Supply	Up to four hot-swap 1400W / 2000W power supplies, N+1 redundant
Cooling Design	16 cooling fans
Dimensions (HxWxD)	12.1" x 18.5" x 29"

Space Optimization
Housed within a 19" industry-standard rack, SuperBlade™ servers reduce server footprint in the data center. Power, cooling and networking devices are aggregated in the rear of the chassis which optimizes the required amount of space.

Up to ten blade servers can be installed in a 7U chassis. Compared to the 10U of rack space that ten 1U servers would normally require as individual servers, the SuperBlade provides about 50% density savings with 60 servers and 24 switches in a 42U rack..

Cable Reduction
The SuperBlade™ server chassis enclosure greatly simplifies the cabling process by aggregating cabling of ten servers at once. Up to 90% of network, power, and KVM cabling required for ten 1U servers are reduced by moving to blade servers in a single chassis. These cabling reductions continue across networking, SAN connectivity, and management controllers.

Reducing the number of cables speeds up the deployment of servers and helps reduce troubleshooting issues by presenting fewer physical connections to the servers.