Product
SKUs |
Brand |
Supermicro |
Model |
SYS-5035B-TB |
Motherboard |
Super C2SBX |
Processor/Cache
|
CPU
|
Single
LGA775 Socket
Supports an Intel® Core™2 Extreme Series processor
(Exhaust Fan, FAN-0055, is required)
Supports an Intel® Core™2 Quad Series processor
Supports an Intel® Core™2 Duo Series processor
|
System
Bus |
1333 /
1066 / 800 MHz system bus |
System
Memory |
Memory
Capacity |
Four 240-pin
DIMM sockets
Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800MHz
memory (Dual Channel) |
Memory
Type |
DDR3 1333/1066/800MHz
unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
DIMM
Sizes |
256
MB, 512 MB, 1 GB, 2 GB |
Memory
Voltage |
1.5 V only
|
On-Board
Devices |
Chipset |
Intel®
X38
ICH9R + PXH/V |
SATA |
Intel®
ICH9R SATA2 (3 Gbps) controller built-in
RAID 0, 1, 5, 10 support (Windows Only) |
Network
Controllers |
1x Intel®
82566 Gigabit PCI-Express Ethernet
Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with
RJ45 output |
Audio |
High
Definition 7.1 Channel Audio |
Super
I/O |
Winbond
83627DHG chip |
Clock
Generator |
ICS9LPRS511
|
System
Cooling |
PCI-Express |
2
(x16) PCI-e 2.0 slot
1 (x1) PCI-e slot |
PCI-X |
2x
64-bit 133 / 100MHz PCI-X (3.3V) slots |
PCI |
2x
32-bit 33MHz PCI (5V) slots
|
Input
/ Output |
Serial
ATA |
Six Serial
ATA ports (3 Gbps performance)
Six SATA hard drives supported |
IDE |
One EIDE
channel supports up to two UDMA IDE devices
ITE8213F chipset |
Floppy |
1 Floppy
controller; 1.44 MB |
LAN |
1x RJ45
LAN port |
USB |
12x USB
2.0 / 1.1 compatible
6 rear + 2 Type A connectors + 2 headers ( 4 ports ) |
Audio |
High Definition
7.1 Channel Audio
Line-in / Line-out / Microphone Ports |
Keyboard
/ Mouse |
PS/2 keyboard
and mouse ports |
Serial
Ports |
2x Fast
UART 16550 serial ports |
Chassis
|
Form
Factor |
Mid-Tower |
Model
|
SC733TQ-465B |
Dimensions
|
Height
|
16.8" (427 mm) |
Width
|
7"
(178 mm) |
Depth
|
20.9"
(531 mm) |
Gross
Weight |
39
lbs (17.7 kg)
|
Available
Colors |
Black |
Front
Panel |
Buttons
|
Power On/Off button • System Reset button |
LEDs
|
Power LED
Hard drive activity LED
Network activity LED
System Overheat LED |
Ports |
2x Front
side USB ports (USB 2.0 ready) |
Drive
Bays |
Hot-swap |
4x 3.5"
SATA hot-swap drive bays
|
peripheral
Bay |
2x 5.25"
peripheral drive bay
1x 3.5" bay for floppy drive
|
Peripheral
Drives |
Floppy |
Teac
Floppy Drive 3.5" 1.44MB (Optional)
|
System
Cooling |
Fans |
1x
9.2cm Front Thermal Fan
|
System
Backplane |
Backplane |
4
x 3.5" SATA Backplane |
Power
Supply |
|
465W
AC power supply w/ PFC |
AC
Voltage |
100
- 240V, 60-50Hz, 6-3 Amp |
DC
Output |
N/A |
+5V
|
20 Amp |
+5V
standby |
3 Amp |
+12V
|
35Amp |
-12V
|
0.5
Amp |
+3.3V
|
15
Amp |
System
BIOS |
BIOS
Type |
16Mb Flash EEPROM with SPI BIOS®
Winbond W39V080FAP |
BIOS
Features |
Plug and
Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3 |
PC Health Monitoring |
CPU |
Monitors
for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V
Standby, VBAT, HT, Memory, Chipset
CPU Core 3-Phase-switching voltage regulator with auto-sense
from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio |
FAN |
Total of
five 4-pin fan headers
5 x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on / off control
Support 3-pin PWM fans (without speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan conn. |
Temperature |
Monitoring
for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) Support
PECI |
LED |
CPU / System
Overheat LED
Suspend-state indicator LED
+5V standby alert LED |
Other Features |
Chassis
intrusion Detection
Chassis intrusion Header |