Product SKUs |
MBD-PDSBA-B |
PDSMI-LN4+-O(Retail Pack) |
Physical Stats |
Form Factor |
• ATX
|
Dimensions |
12.0" width x 9.6 " length , (30.5cm x 24.4cm),
6 layers |
Processor/Cache |
CPU |
Single LGA775 ZIF Socket
Supports a Quad-Core Intel® Xeon® 3200
Series processor
Supports a Dual-Core Intel® Xeon® 3000
Series processor
Supports a Quad-Core Intel® Core™2 Extreme
Series processor
Supports an Intel® Core™2 Quad Series
processor
Supports an Intel® Core™2 Duo Series
processor
Supports a Dual-Core Intel® Pentium® D
processor
Supports an Intel® Pentium® Extreme
Edition processor
Supports an Intel® Pentium® 4 processor
Supports an Intel® Celeron® D processor
|
System Bus |
• 1066 / 800 / 533 MHz system bus |
System Memory |
Memory Capacity |
Four 240-pin DIMM sockets
Supports up to 8 GB of unbuffered ECC / non-ECC
DDR2 667/533MHz memory (Dual Channel)
|
Memory Type |
• DDR2
667/533MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated
DIMMs |
DIMM Sizes |
• 256 MB, 512 MB, 1 GB, 2GB
|
Memory Voltage |
2.5 V
only |
On-Board Devices |
Chipset |
Intel 3000 (Mukilteo-2) chipset
ICH7R + PXH-V + Intel® 82573V + Intel® 82573L
|
Serial ATA |
Intel® ICH7R SATA controller built-in
RAID 0, 1, 5, 10
|
Network Controllers |
Dual double-stack ports using Intel® 82573V/L
Gigabit PCI-Express Ethernet, Four ports total
Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45
output
|
VGA |
On-board
XGI Volari Z7 graphics |
Super I/O |
• Winbond
83627HG chip |
Clock Generator |
CK410 |
Input / Output |
Serial ATA |
Four Serial ATA ports (3 Gbps performance)
Four SATA hard drives supported
|
IDE |
One EIDE channel supports up to two UDMA IDE devices
IDE Master / Slave 2 ports
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
White Connector for Compact Flash (CF, 40-pin IDE
connector) card only
|
Floppy |
1 Floppy controller; 1.44 MB
|
LAN |
4x RJ45
LAN ports |
USB |
USB 2.0 compliant / 1.1 compatible
4x internal USB headers
2x rear ports
|
VGA |
• 1x VGA Port
|
Keyboard / Mouse |
• PS/2 keyboard and mouse ports
|
Serial Ports |
• 1x Fast UART 16550 serial port
• 1x Header
|
Parallel Port |
• 1x ECP / EEP Parallel Header
|
Chassis ( Optimized for PDSMI-LN4+
) |
Mini-1U |
SC513F-260 Rev.B
(OEM Only) |
Important Note |
Only this Supermicro 1U chassis is recommended
for this Network Building Block Solution
|
Expansion Slots |
PCI-X |
1x 64-bit PCI-X 133MHz slot |
PCI |
1x 32-bit 33MHz PCI (5V) slot
|
System BIOS |
BIOS Type |
8Mb Flash
EEPROM with Phoenix BIOS® |
BIOS Features |
Plug and Play (PnP)
DMI 2.3 support
PCI 2.2
ACPI 1.0
SMBIOS 2.3
USB Keyboard support
|
Management |
Software |
Optional IPMI (Intelligent Platform Management
Interface) 2.0
Super Doctor
III
Watch Dog
NMI
W83793 H/W Monitor
|
Power Configurations |
ACPI/APM Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode control for AC power loss recovery
Internal / External Modem Rign-on
|
PC Health Monitoring |
CPU |
Monitors for CPU Cores, +1.5V, +3.3V, +5, ±12V,
+5V Standby
CPU Core 3-Phase-switching voltage regulator
with auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio
|
FAN |
Fan Speed Control
6 4-pin fan headers
6 fans with tachometer monitoring
Status monitor with firmware speed control
Low noise fan speed control
Status monitor for on/off control
Support 3-pin fans (without speed control)
Pulse Width Modulated (PWM) fan connector
|
Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) support
PECI
|
LED |
CPU / System Overheat LED
Standby Power alert LED
|
Other Features |
Chassis Intrusion Detection
Chassis Intrusion Header
|