Physical Stats |
Form Factor |
ATX |
Dimensions |
12.0" width x 9.6 " length , (30.5cm x 24.4cm),
6 layers |
Processor/Cache |
CPU |
Single LGA775 ZIF Socket
Supports an Intel® Pentium® D (Smithfield
Dual Core) processor
Supports an Intel® Pentium® Extreme Edition
processor
Supports an Intel® Pentium® 4 processor
Supports an Intel® Pentium® 4 Extreme Edition
processor
Supports an Intel® Celeron® D processor
Hyper-Threading (HT) capable
2MB / 1MB L2 Cache |
System Bus |
1066 / 800 / 533 MHz system bus |
System Memory |
Memory Capacity |
Four 240-pin DIMM sockets
Supports up to 8 GB of unbuffered, ECC DDRII 667/533MHz
memory (Dual Channel) |
Memory Type |
DDRII 667/533MHz unbuffered, ECC SDRAM, 240-pin
gold-plated DIMMs |
DIMM Sizes |
256 MB, 512 MB, 1 GB, 2GB |
Memory Voltage |
1.8 V only |
On-Board Devices |
Chipset |
Intel E7230 (Mukilteo) Smithfield chipset
ICH7R + PXH-V + Intel® 82573V |
Serial ATA |
Intel® ICH7R SATA controller built-in
RAID 0, 1, 5, 10 |
IPMI |
1U support for Intelligent Platform Management
Interface v.2.0 ( Optional:
AOC-IPMI20-E )
|
Network Controllers |
Dual-port Intel® 82573V Gigabit PCI-Express
Ethernet (Tekoa)
Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45
output |
VGA |
On-board ATI RageXL graphics, 8MB |
Super I/O |
Winbond 83627EHF chip |
Clock Generator |
CK410 |
Input / Output |
Serial ATA |
Four Serial ATA ports (3 Gbps performance)
Four SATA hard drives supported |
IDE |
One EIDE channel supports up to two UDMA IDE devices
IDE Master / Slave 2 ports
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
White Connector for Compact Flash (CF) card only |
Floppy |
1 Floppy controller; 1.44 MB |
LAN |
2x RJ45 LAN port |
USB |
6x USB 2.0 compliant / 1.1 compatible
4x internal USB headers
2x rear ports |
VGA |
1x VGA Port |
Keyboard / Mouse |
PS/2 keyboard and mouse ports |
Serial Ports |
1x Fast UART 16550 serial port
1x Header |
Parallel Port |
1x ECP / EEP Parallel Header |
Audio |
1x Line-in / Line-out / Microphone Port |
Chassis ( Optimized
for PDSMi ) |
Mini 1U |
SC512C-260
SC512L-260
SC513L-260
|
1U |
SC811i-260
SC813MT-300C
|
Important Note |
Only Supermicro 1U chassis is recommended for 1U
Building Block Solutions |
Expansion Slots |
PCI-Express / PCI-X |
1x Universal (SXB-E) Slot for Riser (x1)
[ 1 (x8) PCI-Express Slot ] OR [ 1x 64-bit PCI-X 133MHz Slot ] |
PCI |
1x 32-bit 33MHz PCI (5V) slot |
System BIOS |
BIOS Type |
8Mb Flash EEPROM with Phoenix BIOS® |
BIOS Features |
Plug and Play (PnP)
APM 1.2
DMI 2.3 support
PCI 2.2
ACPI 1.0
USB Keyboard support |
Management |
Software |
Optional IPMI (Intelligent Platform Management
Interface) 2.0
Super Doctor
III
Watch Dog
NMI |
Power Configurations |
ACPI/APM Power Management
Wake-On-LAN (WOL) header
Power-on mode control for AC power loss recovery |
PC Health Monitoring |
CPU |
Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V,
+3.3V/+5V Standby, VBAT)
CPU Core 4-Phase-switching voltage regulator with
auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio |
FAN |
Fan Speed Control
Total of five proprietary fan headers
5 fans with tachometer monitoring
Status monitor with firmware speed control
Low noise fan speed control
Status monitor for on/off control
Support 3-pin fans (without speed control)
Pulse Width Modulated (PWM) fan connector |
Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support |
LED |
+5V Standby Alert LED
Suspend-state indicator LED |
Other Features |
Chassis Intrusion Detection
Chassis Intrusion Header |