| Product SKUs |
| MBD-H8DAR-8-B |
• H8DAR-8 (Bulk Pack) |
| Physical Stats |
| Form Factor |
• Extended ATX |
| Dimensions |
• 12" x 13.05" (30.5cm x 33.2cm) |
| Processor/Chipset |
| CPU |
• Dual 940-pin ZIF Sockets
• Supports up to two Dual-Core AMD Opteron™ 200 Series
processor(s)
• VRM x3 |
| Chipset |
• AMD 8131 HyperTransport PCI-X Tunnel
• AMD 8111 HyperTransport I/O Hub |
| System Memory |
| Memory Capacity |
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR 400 MHz memory or
• Supports up to 16 GB DDR 333 MHz memory or
• Supports up to 32 GB DDR 266 MHz memory
• Single or Dual (recommended) channel memory support
• For Single CPU: Memory must be populated in CPU1
DIMMs only
• For Dual CPUs: Recommended that memory be populated
equally in adjacent memory banks |
| Memory Type |
• DDR 400/333/266MHz buffered (registered) ECC SDRAM
72-bit, 184-pin gold-plated DIMMs |
| DIMM Sizes |
• 256 MB, 512 MB, 1GB, 2GB, 4GB** |
| Memory Voltage |
• 2.5 V only |
| Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| SCSI |
• Adaptec AIC-7902W Controller
• Dual-Channel Ultra320 SCSI with Host RAID (Host
RAID only supports 4 drives)
• Host RAID 0, 1, 10, JBOD |
| Zero Channel RAID |
• Support for Zero-Channel RAID with Adaptec 2015S
SCSI ZCR Card or AOC-SOZCR1 (with
SO-DIMM ZCR socket)
• (Card not included) |
| IPMI |
• 1U support Intelligent Platform Management Interface
v.2.0+ ( Optional:
1UIPMI-B )
• RMM (Remote Management Module)
• (Card not included) |
| Network Controllers |
• Broadcom® 5704 Dual Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output |
| VGA |
• ATI Rage XL 8MB PCI Graphics Controller |
| Chassis ( Optimized
for H8DAR-8 ) |
| 1U Chassis |
• SC813S-500C *
• SC812S-420C *
* Please use air-shroud CSE-PT0082
(Air-shrouds sold separately) |
| Important Chassis
Notes |
• To ensure system stability, a 420W (minimum) ATX
power supply
[8-pin (+12V) and 24-pin are required] |
| Expansion Slots |
| PCI-X |
• 1 64-bit 100MHz PCI-X (3.3V) slot |
| IPMI |
• IPMI 2.0 expansion slot |
| Input / Output |
| IDE |
• Dual ATA 133/100 EIDE channels support up to four
UDMA IDE devices |
| Floppy |
• 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support |
| LAN |
• 2 RJ45 LAN ports |
| USB |
• FUCI
• Up to 5 USB Ports 1.1 Compliant |
| Keyboard / Mouse |
• PS/2 keyboard and mouse ports |
| Serial Ports |
• 2 Fast UART 16550 serial ports |
| System BIOS |
| BIOS Type |
• 4Mb Flash EEPROM with AMI® BIOS |
| BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.3
• ACPI 2.0
• Fan Speed Control |
| Management |
| Software |
• Optional IPMI (Intelligent Platform Management
Interface) 2.0
• Super
Doctor III
• Watch Dog |
| Power Configurations |
• ACPI/API Power Management
• Wake-On-LAN (WOL) header
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on |
| PC Health Monitoring |
| CPU |
• Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V
Standby, +5V Standby, HyperTransport voltage 1.2V,
memory voltage 2.5V, DDR termination 1.25V, chipset
voltage 1.8V
• Up to 5 fan status
• Supports System Management Utility |
| FAN |
• Total up to 5-fan status
• 3-pin fan speed control |
| Temperature |
• Monitoring for CPU and chassis environment |
| LED |
• Overheat LED |
| Other Features |
• Chassis Intrusion Header |
.gif){kind=spacer}
