Brand |
Supermicro |
Model |
H8DCR-3-O (Standard Retail Pack) |
Form
Factor |
Extended
ATX
|
Dimensions |
12" x 13.05 " (30.5cm x 33.2cm)
|
CPU |
Dual 940-pin ZIF Sockets
Supports up to two Dual-Core AMD Opteron™ 200
Series processor(s)
Single CPU configurations are not recommended
VRM x3
|
Chipset |
nVidia nForce Pro 2200 (CK804)
AMD 8132
|
Memory
Capacity |
Eight 184-pin DIMM sockets
Supports up to 16 GB DDR 400 MHz memory
or
Supports up to 32 GB DDR 333 MHz memory
or
Supports up to 32 GB DDR 266 MHz memory
Single or Dual (recommended) channel memory
support
For Single CPU: Memory must be populated
in CPU1 DIMMs only
For Dual CPUs: Recommended that memory
be populated equally in adjacent memory banks
|
Memory
Type |
DDR 400/333/266MHz buffered (registered) ECC SDRAM
72-bit, 184-pin gold-plated DIMMs |
DIMM
Sizes |
256 MB, 512 MB, 1GB, 2GB, 4GB**
|
Memory
Voltage |
• 2.5 V only |
Error
Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
SAS |
Adaptec AIC-9410W SAS Controller
8 SAS Ports
RAID 0, 1, 10
Zero-Channel RAID: Supermicro All-In-One
ZCR card:AOC-LPZCR1
|
SATA |
nVidia nForce Pro 2200 SATA 3.0Gbps Controller
4 SATA Ports
nVidia RAID 2.0
SATA RAID 0, 1, 0+1 Support
|
Network Controllers |
Two Broadcom BCM5721 Gigabit LAN / Ethernet Controllers
Supports 10Base-T, 100Base-TX, and 1000Base-T, RJ45 output
|
IPMI |
1U support: Intelligent Platform Management Interface v.2.0+
( Optional:
1UIPMI-B )
Remote Management Module
(Card not included)
|
Graphics |
ATI Rage XL 8MB |
Super I/O |
Winbond 83627HG
|
Clock Generator |
ICS8634 |
BIOS Type |
8Mb Flash EEPROM with AMI® BIOS
49LF080A BIOS Chip
|
BIOS Features |
Plug and Play (PnP)
ACPI 1.0 / 2.0
PCI 2.2
DMI 2.3
BIOS Rescue Hot Keys
SMBIOS 2.3
USB Keyboard support
|
1U |
SC813TQ+-500 |
Important Chassis
Notes |
To ensure system stability, a 420W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
PCI-Express |
2 PCI-express x8 slots |
PCI-X |
1 64-bit 100MHz PCI-X slot
1 64-bit 133MHz PCI-X slot
Note: Dual Processors are required for correct PCI-X expansion
slot operation
|
Serial Attached
SCSI |
Integrated Adaptec AIC-9410W(SAS) Controller
Two Serial Attached SCSI (SAS) ports (1 internal, 1 external)
Each SAS port supports up to 4 SAS / SATA drives for a total
of up to 8 SAS or SATA hard drives
|
Serial ATA |
Integrated SATA 3.0Gbps Controller
Four Serial ATA Ports
Four SATA hard drives supported
|
IDE |
Dual EIDE channels support up to four UDMA IDE devices
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA 100/133
|
Floppy |
1 Floppy port; 1.44 MB |
LAN |
2 RJ45 LAN ports |
USB |
FUCI
Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible
2 Rear Ports
2 Internal Headers
|
VGA |
1 VGA port |
Keyboard/Mouse |
PS/2 keyboard and mouse ports |
Software |
Super Doctor
III
Watch Dog / NMI
Optional IPMI 2.0
|
Power Configurations |
ACPI Power Management
Wake-On-Ring (WOR) headert
Wake-On-LAN (WOL) header
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on
|
CPU |
Monitors CPU Core Voltages, +1.5V, +2.5V, +3.3V, +5V, ±12V,
HyperTransport Link voltage 1.2V, memory voltage 2.5V, 3.3V Standby,
VBAT |
Fan |
Total up to 5-fan status tachometer monitoring
Up to five 3-pin fan headers
|
Temperature |
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
I 2 C Temperature Sensing Logic
|
LED |
CPU / System Overheat LED
Suspend-State Indicator LED
+5V Standby Alert LED
|