Product SKUs |
MBD-H8DM3-2-O |
H8DM3-2 (Standard Retail Pack) |
Physical Stats |
Form Factor |
Extended ATX |
Dimensions |
12" x 13.05" (30.5cm x 33.2cm) |
Processor/Cache |
CPU |
Dual 1207-pin Socket F
Supports up to two AMD Opteron 2000 Series
(Socket F) processor(s)
Dual-core / Support
|
System Bus |
1000MHz
HyperTransport |
Chipset |
nVidia MCP55 Pro
AMD 8132
|
System Memory |
Memory Capacity |
Eight 240-pin DIMM sockets
Supports up to 32 GB DDR2 667 MHz
memory
Supports up to 32 GB DDR2 533 MHz
memory
Supports up to 32 GB DDR2 400 MHz
memory
For Single CPU: Memory must be populated
in CPU1 DIMMs only
For Dual CPUs: Recommended that memory
be populated equally in adjacent memory
banks
Dual channel memory bus
|
Memory Type |
DDR2
667/533/400 MHz buffered (registered) ECC SDRAM 72-bit,
240-pin gold-plated DIMMs |
DIMM Sizes |
• 256 MB, 512 MB, 1GB, 2GB, 4GB |
Memory Voltage |
• 1.8 V only
|
On-Board Devices |
SAS |
LSI SAS1068E Controller |
SATA |
nVidia MCP55 Pro SATA2 3.0Gbps Controller
6 SATA2 Ports
nVidia RAID 2.0
SATA RAID 0, 1, 0+1, 5 JBOD Support
|
Zero Channel
RAID |
Intelligent Platform Management Interface
v.2.0, Low Profile (Optional:
AOC-SIMLP)
RMM (Remote Management Module)
(Card not included)
|
IPMI |
nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet
Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output
|
Network
Controllers |
nVidia MCP55 Pro Chipset Dual-port LAN /
Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output
|
Graphics |
ATI
ES1000 Graphics Controller
|
Super
I/O |
Winbond 83627HF |
Input / Output |
SAS |
8 SAS ports |
SATA |
6 SATA2
ports |
IDE |
- Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
Floppy |
1 Floppy port; 1.44 MB support
|
LAN |
2 RJ45 LAN ports |
USB |
Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
2 Rear Ports
4 Internal Headers
|
VGA |
1 VGA
port |
Keyboard
/ Mouse |
PS/2 keyboard and mouse ports
|
Serial
Ports |
1 Fast UART 16550 serial port
1 serial port header
|
Chassis (
Optimized for
H8DM3-2
) |
2U Chassis |
CSE-825TQ-R700LPV *
CSE-825TQ-560LPV*
* Please use air-shroud
MCP-310-00030-01
(Air-shrouds sold separately) |
3U Chassis |
CSE-836TQ-R800V
CSE-836E2-R800
CSE-836E1-R800V
CSE-833T-R760
CSE-833T-550
CSE-933E2-R760
CSE-933E1-R760
CSE-933T-R760
|
Tower
/ 4U Rackmount |
CSE-745TQ-R800
CSE-745TQ-700
CSE-743TQ-R760
CSE-743T-R760
CSE-743T-650
|
Important Note |
To ensure
system stability, a 550W (minimum) ATX power supply
[ 4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
Expansion Slots |
PCI-Express |
2 x8 PCI-e slots
1 x4 PCI-e (in a x8 physical slot)
1 SEPC (Supermicro extended Power Connector)
slot for 2U active riser cards with a power
extension (i.e. CSE-RR2UE-AX)
|
PCI-X |
1 64-bit 133MHz PCI-X (3.3V) slots
2 64-bit 133/100MHz PCI-X (3.3V) slots
|
IPMI |
IPMI 2.0 expansion slot
|
System BIOS |
BIOS Type |
8Mb Flash EEPROM with AMI® BIOS |
BIOS Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 2.0
USB Keyboard Support
SMBIOS 2.3
|
Management |
Software |
Optional IPMI (Intelligent Platform Management
Interface) 2.0
Super Doctor
III
Watch Dog
|
Power Configurations |
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) headert
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss
recovery
Internal/External modem remote ring-on
|
PC Health Monitoring |
CPU |
Monitors CPU Core Voltages, +3.3V, +5V, +12V,
5V Standby, VBAT
CPU 4-Phase-switching voltage reulator
|
FAN |
Total up to 8-fan status tachometer monitoring
Up to six 3-pin and two 4-pin fan headers
Status monitor for speed control
3-pin fan support
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
|
Temperature |
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
I 2 C Temperature Sensing Logic
|
LED |
CPU / System Overheat LED
+5V Standby Alert LED
|
Other Features |
Chassis Intrusion Detection
Chassis Intrusion Header
Chipkill Support
|
RoHS
|
RoHS
Compliant 5/6, Server Exemption
|