| Part Number |
| MBD-X8DT3-O |
X8DT3 (Standard Retail Pack) |
| Physical Stats |
| Form Factor |
Extended ATX |
| Dimensions |
12" x 13" (30.5cm x 33cm) |
| Processor/Cache |
| CPU |
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5500 sequence (Nehalem-EP processor)
|
| QPI |
up to 6.4 GT/s |
| System Memory |
| Memory
Capacity |
18x 240-pin DIMM sockets
Supports up to 144 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 Unbuffered memory
Memory Mirroring supported |
| Memory
Type |
1333 / 1066 / 800MHz ECC Registered / Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
1GB, 2GB, 4GB, 8GB |
| Memory
Voltage |
1.5 V |
| On-Board Devices |
| Chipset |
Intel® 5520 (Tylersburg) chipset
ICH10R + IOH-36D |
| Serial ATA |
LSI SAS1068E
RAID 0, 1, 10 support
(Optional: AOC-IButton68) RAID 5 support |
| Network Controllers |
Intel® 82576 Dual-Port Gigabit Ethernet
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization |
| Graphics |
Matrox G200eW |
| Super
I/O |
Winbond 83827HF chip |
| Input / Output |
| Serial
ATA |
Six Serial ATA ports
Six SATA hard drives supported |
| SAS |
8 SAS / SATA ports |
| LAN |
2x RJ45 LAN ports |
| USB |
4x USB rear ports
2x USB on-board
4x USB internal headers
Total 8 USB 2.0 Compliant |
| VGA |
1x VGA Port |
| Keyboard/Mouse |
PS/2 keyboard and mouse ports |
| Serial Port/ Header |
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header (Option) |
| Chassis ( Optimized for X8DT3 ) |
| 1U |
CSE-113TQ-700CB
CSE-113TQ-R650CB
CSE-815TQ-560CV
CSE-815TQ-700CV |
| 2U |
CSE-213A-R900LP
CSE-216A-R900LP
CSE-216E1-R900LP
CSE-216E2-R900LP
CSE-823MTQ-R700LP
CSE-823TQ-650LP
CSE-825MTQ-R700LPB
CSE-825TQ-560LPV
CSE-825TQ-R700LPV
CSE-826TQ-R800LPV |
| 3U |
CSE-833T-550
CSE-833T-650
CSE-833T-R760
CSE-835TQ-R800B
CSE-836E1-R800V
CSE-836E2-R800V
CSE-836TQ-R800V
CSE-933E1-R760
CSE-933E2-R760
CSE-933T-R760
CSE-936A-R900B |
| Tower / 4U Rackmount |
CSE-743i-645
CSE-743i-650
CSE-743i-R760
CSE-743T-645
CSE-743T-650
CSE-743T-R760
CSE-743TQ-865-SQ
CSE-743TQ-865B
CSE-743TQ-R760
CSE-745TQ-800
CSE-745TQ-R800
CSE-846E1-R900B |
| Important Chassis Notes |
To ensure system stability, a 550W (minimum) ATX power supply
[Two 8-pin (+12V) and 24-pin are required] |
| Expansion Slots |
| PCI-Express |
- 3 (x8) PCI-E 2.0 (1 in x16 slot)
- 1 (x4) PCI-E slot
|
| PCI |
2x 33MHz PCI slots |
| System BIOS |
| BIOS
Type |
32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS
Features |
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support |
| Management |
| Software |
Super Doctor III |
| Power
Configurations |
ACPI / ACPM Power Management |
| PC Health Monitoring |
| CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator
|
| FAN |
Total of eight fan headers supporting up to 8 fans
Eight 4-pin fan headers
8x fans with tachometer status monitoring
Support 3-pin fans (w/o speed control)
Low noise fan speed control (4-pin fan only)
|
| Temperature |
Monitoring for CPU and chassis environment
Thermal Control for 8x fan connectors
PECI |
| Other
Features |
Chassis intrusion detection
Chassis intrusion header |
.gif){kind=spacer}
