1 x 204-pin DDR3L-1333 SO-DIMM up to 8GB (1.35V required)
Graphics
Intel HD Graphics, 313MHz - 854MHz
Audio
Realtek ALC662 HD Audio codec
LAN
2 x Realtek RTL8111G Gigabit LAN with Enhanced Surge Protection
Storage
1 x SATA2 3Gb/s Connector 1 x Shared mSATA/mini-PCI Express Combo slot (Full-size)
Super IO
FINTEK F81866A
Back Panel Connectors
1 +9V ~ +24V DC-in Jack 1 VGA (2560 x 1600@ 60Hz) 1 USB 3.0 3 USB 2.0 2 RJ45 LAN (10/100/1000) 1 3.5mm Audio connector (Line-OUT)
Onboard I/O Connectors
1 SATA2 3Gb/s Connector 1 Shared mSATA/mini-PCI Express Combo Slot (full-size) 1 Mini-PCI Express Slot (half-size) 4 Serial Headers (3 * RS232, 1 * RS232/422/485) 2 USB Pin Headers for up to 4 additional USB 2.0 Ports 1 30-pin 24-bit Dual Channel LVDS connector/inverter (CHRONTEL CH7511B up to 1920 x 1200) 1 40-pin eDP Header (2560 x 1600@ 60Hz or 1920 x 1400 @ 75Hz) 1 AT/ATX Mode Jumper 1 Chassis Intrusion Jumper 1 10-pin GPIO Header 1 6-pin PS/2 Mouse/Keyboard Header 2 2-pin LAN LED Header 1 2-pin SPDIF Header 1 4-pin SMBUS Header 1 9-pin Audio Header 1 4-pin Fan Header 1 Front Reset/Power Buttons 1 4-pin Floppy Power Output (Male)
Power Supply for NF3AE
External Power Supply – the board can be powered with a +9V ~ +24V +-3% external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +24V and the shell is GND.
Market Segments Supported
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC