blank
Accessories
Barebones /Computers
Cables/Adapters
Cases
Coolers/ Fans
Displays /LCDs
DVD ROM
Flash Storages
Hard Drives /SSD
Keyboards / Mice
Memory
Motherboards
Networkings
Panel PCs
PICMG Boards
POS systems
Power Supplies
Processors
Services
Softwares
Video Cards
Advantech LCD Kits
/ Open Frame
IEI PICMG Backplane
Your PICMG Solutions
Innodisk SATA DOM
Intel Mini-itx Motherboards
Portwell Neworking Appliance
Jetway JNF731-7300U Motherboard, 3.5 SBC, Kaby Lake-U, i5-7300U, 4x Intel LAN, Flat aluminum heatsink for direct attach
Images shown for reference only
Shipping Extra

ATACOM Part #:IMB3_JETA_KL_01

Manufacturer Part#:JNF731-7300U

  
   Price: $780.95

  
Specification
Jetway NF731 3.5" SBC Motherboard
ProcessorFanless Intel® Celeron 3965U/3955U/3865U/3855U, Skylake-U/Kaby lake-U 15W Processors
* Ships with flat heatsink installed for direct attaching to chassis
Memory1 x 260-pin SODIMM un-buffered DDR4-2133 up to 16GB
GraphicsIntel HD Graphics 610/510, 300MHz - 900MHz
AudioNA
LAN1 x Intel i219-LM PHY Gigabit LAN
3 x Intel i211-AT PCI-E Gigabit LAN
Storage1 x SATA3 6Gb/s Connector
1 x mSATA
Super IOFINTEK F81768D
TPMIntel fTPM 2.0 (PTT) Trusted Computing Firmware
OEM Option: Onboard TPM v1.2 or v2.0
Back Panel Connectors
1 Serial Port (RS232)
4 RJ45 LAN (10/100/1000)
2 USB 3.0
1 +12V 2.5mm Diameter Locking DC Power Jack
Onboard I/O Connectors
1 SATA3 6Gb/s Connector
1 mSATA Slot (Full-size)
2 Mini PCI Express Slot (1 * Full-size, 1 * Half-size)
1 Serial Headers (RS232/422/485)
2 USB Pin Headers for up to 3 additional USB 2.0 Ports
1 19-pin HDMI 1.4 Header (4096 * 2304 @ 24Hz)
1 SIM Card Socket
1 8 bit GPIO Header
1 AT/ATX Mode Jumper
1 Chassis Intrusion Header
1 7-pin PS/2 Mouse/Keyboard Header
4 2-pin LAN LED Header
1 5-pin SMBUS Header
1 4-pin Fan Header
1 4-pin Floppy Power Output (Male)
1 2-pin +12V Alternate Power Connector
Power Supply for NF731
External Power Supply – the board can be powered with a +12V external power supply though a locking DC connector on the back panel. The rear +12V DC jack accepts locking plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +12V 2-pin power connector, where pin 1 is +12V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.

Caution: There is no isolation circuitry between the external +12V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V DC jack is covered if the internal 2-pin power connector is to be used.
Market Segments Supported
√ Networking/Storage Server/Mail Server/Print Server
√ Industrial Automation/Control
√ Medical
√ IoT
 



Graphic Fanless Compact Engine
Jetway JBC361F35-T40E-B


Jetway JBC371F35W-T40E-B
Fanless Graphic Compact Engine


4 HDMI Ports (Optional 10 HDMI Ports)
Jetway NF83 AMD Motherboard


Jetway HBJC128F83-B Digital Signage