blank
Accessories
Barebones /Computers
Cables/Adapters
Cases
Coolers/ Fans
Displays /LCDs
DVD ROM
Flash Storages
Hard Drives /SSD
Keyboards / Mice
Memory
Motherboards
Networkings
Panel PCs
PICMG Boards
POS systems
Power Supplies
Processors
Services
Softwares
Video Cards
Advantech LCD Kits
/ Open Frame
IEI PICMG Backplane
Your PICMG Solutions
Innodisk SATA DOM
Intel Mini-itx Motherboards
Portwell Neworking Appliance
Jetway JNF631-3350/ NF631-3350 3.5 in SBC, Apollo Lake, Intel Celeron N3350 Dual-core SoC, 2xIntel LAN, 3 Display, 2xDP 4K@60Hz, eDP 4K ,60Hz, SATA3, M.2 SATA 2242
Images shown for reference only
Shipping Extra

IMB3_JETA_MM_29

Manufacturer Part#:JNF631-3350

  
   Price: $175.95

  
Specification
Jetway NF631 3.5" SBC Motherboard
ProcessorIntel® Pentium N4200 Processor Quad Core 1.10 GHz - 2.50 GHz, 6W TDP
Intel® Celeron N3350 Processor Dual Core 1.10 GHz - 2.40 GHz, 6W TDP
* Ships with black finned heatsink for bench testing
Memory1 x 204-pin DDR3L-1866 SO-DIMM up to 8GB (1.35V required)
GraphicsIntel HD Graphics 505, 200MHz - 750MHz (N4200)
Intel HD Graphics 500, 200MHz - 650MHz (N3350)
AudioRealtek ALC662 HD Audio Codec
LAN2 x Intel i211AT PCI-E Gigabit LAN
Storage1 x SATA3 6Gb/s Connector
1 x M.2 SATA M-key 2242 length only
Super IOFINTEK F81866
TPMIntel fTPM 2.0 (PTT) Trusted Computing Firmware
Back Panel Connectors
2 RJ45 LAN (10/100/1000)
4 USB 3.0
1 3.5mm Audio Jack (Line-out & MIC)
1 RJ45 Type Serial Port (RS232)
2 Display Port (4096 x 2160 @ 60Hz)
1 +12V 2.5mm Diameter DC Power Jack
Onboard I/O Connectors
1 SATA3 6Gb/s Connector
1 M.2 SATA 2242 only
1 Mini PCI Express Slot (Full-size)
5 Serial Headers (4 * RS232, 1 * RS232/422/485)
1 USB Pin Headers for up to 2 additional USB 2.0 Ports
1 40-pin eDP (4096 * 2304 @ 60Hz)
1 SIM Card Socket
1 Micro SD Card Slot
1 8 bit GPIO Header
1 AT/ATX Mode Jumper
1 6-pin PS/2 Mouse/Keyboard Header
1 9-pin Front Audio Header
1 5-pin SMBUS Header
1 4-pin Fan Header
1 4-pin Floppy Power Output (Male)
1 2-pin +12V Alternate Power Connector
Power Supply for NF631
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +12V 2-pin power connector, where pin 1 is +12V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.

Caution: There is no isolation circuitry between the external +12V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V DC jack is covered if the internal 2-pin power connector is to be used.
Market Segments Supported
√ Digital Signage
√ Retail (POS/Kiosk/ATM)
 



Graphic Fanless Compact Engine
Jetway JBC361F35-T40E-B


Jetway JBC371F35W-T40E-B
Fanless Graphic Compact Engine


4 HDMI Ports (Optional 10 HDMI Ports)
Jetway NF83 AMD Motherboard


Jetway HBJC128F83-B Digital Signage