blank
Accessories
Barebones /Computers
Cables/Adapters
Cases
Coolers/ Fans
Displays /LCDs
DVD ROM
Flash Storages
Hard Drives /SSD
Keyboards / Mice
Memory
Motherboards
Networkings
Panel PCs
PICMG Boards
POS systems
Power Supplies
Processors
Services
Softwares
Video Cards
Advantech LCD Kits
/ Open Frame
IEI PICMG Backplane
Your PICMG Solutions
Innodisk SATA DOM
Intel Mini-itx Motherboards
Portwell Neworking Appliance
Jetway JNF632E-7200U 3.5 Inch SBC, Skylake-U, i5-6300U, NOTE: ships with passive heatsink installed for bench testing
Images shown for reference only
Shipping Extra

IMB3_JETA_SK_17

Manufacturer Part#:JNF632E-7200U

  
   Price: $655.95

  
Specification
Jetway NF632E 3.5" SBC Motherboard
ProcessorIntel® Core i5-6300U, 2.40GHz – 3.00GHz Burst, 2-Core 4-Thread, 15W TDP, vPro
Intel® Core i5-7200U, 2.50GHz – 3.10GHz Burst, 2-Core 4-Thread, 15W TDP
* Ships with passive heatsink installed for bench testing
Memory2 x 260-pin SODIMM un-buffered Dual Channel DDR4-2133 up to 32GB Total
GraphicsIntel HD Graphics 520, 300MHz - 1.0GHz
AudioRealtek ALC662VD HD Audio
LAN1 x Intel i219LM PHY Gigabit LAN (iAMT 11.0)
1 x Intel i211AT PCI-E Gigabit LAN
Storage1 x SATA3 6Gb/s Connector
1 x Shared mSATA/mini-PCI Express Combo Slot (Full-size)
Super IONUVOTON NCT6116D
TPMIntel fTPM 2.0 (PTT) Trusted Computing Firmware
OEM Option: Onboard TPM v1.2 or v2.0
Back Panel Connectors
1 3.5mm Audio connector
4 USB 3.0
2 RJ45 LAN (10/100/1000)
1 Display Port (4096 x 2304 @ 60Hz)
1 HDMI (4096 x 2304 @ 24Hz)
2 USB 2.0
1 +9V ~ +24V DC-in Jack
Onboard I/O Connectors
1 SATA3 6Gb/s Connector
1 Shared mSATA/mini-PCI Express Combo Slot (Full-size)
1 Mini-PCI Express Slot (Half-size)
6 Serial Headers (5 * RS232, 1 * RS232/422/485)
3 USB Pin Headers for up to 5 additional USB 2.0 Ports
1 40-pin eDP Header (4096 x 2304 @ 60Hz)
1 30-pin LVDS / 8-pin Inverter Header (1920 x 1080 @ 60Hz)
1 8 bit GPIO Header
1 AT/ATX Mode Jumper
1 PS/2 Mouse/Keyboard Header
1 Chassis Intrusion Header
2 2-pin LAN LED Header
1 4-pin Speaker out Header with 3W Amplifier
1 5-pin SMBUS Header
1 9-pin Audio Header
1 Front Reset/Power Buttons
1 4-pin Fan Header
1 4-pin Floppy Power Output (Male)
1 2-pin +9~24V Alternate Power Connector
Power Supply for NF632E
External Power Supply – the board can be powered with a +9V ~ +24V external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +24V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +9V ~ +24V 2-pin power connector, where pin 1 is +9V ~ +24V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.

Caution: There is no isolation circuitry between the external +9V ~ +24V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9V ~ +24V DC jack is covered if the internal 2-pin power connector is to be used.
Market Segments Supported
√ Banking & Commercial
√ Digital Signage
√ AIO & Panel PC
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ IoT
√ HTPC
 



Graphic Fanless Compact Engine
Jetway JBC361F35-T40E-B


Jetway JBC371F35W-T40E-B
Fanless Graphic Compact Engine


4 HDMI Ports (Optional 10 HDMI Ports)
Jetway NF83 AMD Motherboard


Jetway HBJC128F83-B Digital Signage