IEI NANO-CV-N26001-R10 NM10 EPIC Embedded Single Board Computer NANO w

IEI NANO-CV-N26001-R10 NM10 EPIC Embedded Single Board Computer NANO w/ On-Board Atom N2600 1.6GHz 1MB Dual Core, DDR3 SO-DIMM, HDMI, VGA, 2x LVDS, 2x GBLAN

Images shown for reference only

1x PCI-104, 1x PC/104, 4x COM, 4x USB 2.0, 2x SATA 3G (1x mSATA), 1x microSD, mini-PCIe, Audio, TPM, Power:12V-24V, 12V@1.72A, Temp:-20-70C, Dimension:(4.5x6.5 inches), EPIC Embedded Single Board Computer NANO

Shipping Extra

ATACOM Part #: IMBE_IEIX_AC_05

Manufacturer Part#:NANO-CV-N26001-R10

Price: $499.95

Brand	IEI
Manfacture Part#	NANO-CV-N26001-R10
CPU	Intel® dual core Atom™ D2550 1.86GHz processor
	Intel® dual core Atom™ N2600 1.6GHz processor
	Intel® dual core Atom™ N2800 1.86GHz processor (optional)
System Chipset	Intel® NM10
BIOS	UEFI BIOS
System Memory	1 x 1066MHz DDR3 SO-DIMM supporting up to 4GB (for D2550 and N2800)
System Memory	1 x 800MHz DDR3 SO-DIMM supporting up to 2GB (for N2600)
Ethernet	Dual GbE by Realtek RTL8111E controllers
I/O Interface	3 x RS-232
	1 x RS-422/485
	4 x USB 2.0
	1 x microSD (Only for boot up to DOS)
	2 x USB 3.0
	1 x 6-pin wafer for PS/2 KB/MS
	2 x SATA 3Gb/s with 5V power connector (SATA1 and mSATA shares SATA signal)
TPM	1 x 20-pin LPC pin header
SMBus	1 x 4-pin wafer connector
Audio	Realtek ALC662 HD audio codec
Display Interfaces	Dual display supported
	1 x VGA (up to 1920 x 1200 @60Hz)
	(Due to Intel GMA driver limitation, the monitor connected to the VGA connector may not have signal to it or become extended desktop after restarting from the graphics driver installation. To solve this problem, press the Ctrl+Alt+F1 hotkey to switch the primary screen to CRT mode.)
	1 x HDMI (up to 1920 x 1200 @60Hz)
	LVDS1 integrated in the D2550/N2600
	Single-channel 24-bit LVDS by D2550, resolution support up to 1440x900 @60Hz
	Single-channel 18-bit LVDS by N2600 and N2800, resolution support up to 1366x768 @60Hz
	LVDS2 supports 24-bit dual-channel by CH7511 DP to LVDS converter, resolution support up to
	1920x1200 for D2550, 1600x1200 for N260/N2800
Expansion	1 x PCIe Mini card (compatible with mSATA SSD device) (SATA1 and mSATA shares SATA signal)
	1 x PC/104 slot (ISA)
	1 x PCI/104 slot (PCI)
Watchdog Timer	Software programmable supports 1~255 sec. system reset
Power Supply	Maximum input voltage range: 9V ~ 28V
	Recommended operating input voltage range: 12V ~ 24V
	One internal 4-pin (2x2) power connector
Power Consumption	12V@2.1A (Intel® D2550 1.86GHz CPU with 1333MHz 2GB DDR3 memory)
Power Consumption	12V@1.72A (Intel® N2600 1.6GHz CPU with 1333MHz 2GB DDR3 memory)
Graphic	GMA 3650 at 640MHz graphics core speed (for N2550 and N2800)
Graphic	GMA 3600 at 400MHz graphics core speed (for N2600)
GPIO	8-bit GPIO
Temperature	-20°C ~ 60°C with free air, -20°C ~ 70°C with force air for D2550 processor
Temperature	-20°C ~ 70°C with free air, -20°C ~ 75°C with force air for N2600/N2800 processor
Humidity	5% ~ 95%, non-condensing
Fan Connector	1 x 3-pin CPU fan connector
Fan Connector	1 x 3-pin system fan connector

1. EPIC form factor with Intel® D2550/N2600 dual-core proccessor supporting DDR3/DDR3L (1.35V) memory
2. Wide range 9V ~ 28V DC input design
3. Flexible VGA, dual LVDS and HDMI with dual-display support
4. Supports PC/104-Plus and PCIe Mini card slot compatible with mSATA SSD storage
5. Complete I/O with six USB, two SATA 3Gb/s, four COM and audio
6. IEI One Key Recovery solution allows you to create rapid OS backup and recovery