IEI NANO-QM871-i1-i7-R10 EPIC SBC supports Intel 22nm 4th Generation M

IEI NANO-QM871-i1-i7-R10 EPIC SBC supports Intel 22nm 4th Generation Mobile Core i7-4700EQ processor (47W), with VGA/Dual HDMI/LVDS, Dual PCIe GbE, USB 3.0, PCIe Mini, PCIe/104, SATA 6Gb/s, Audio, iRIS-1010 and RoHS

Images shown for reference only

Shipping Extra

ATACOM Part #: IMBE_IEIX_MI_74

Manufacturer Part#:NANO-QM871-i1-i7-R10

Price: $995.95

CPU	Intel® mobile Core™ i7-4700EQ on-board processor with Intel® AMT 9.0 support (2.4GHz, quad-core, 6MB cache, TDP=47W)
System Chipset	Intel® QM87
BIOS	UEFI BIOS
System Memory	One 204-pin 1600/1333MHz dual-channel DDR3 & DDR3L SDRAM unbuffered DIMMs support up to 8GB
Ethernet	LAN1: Intel® I217LM PHY with Intel® AMT 9.0 support LAN2: Intel® I210-AT PCIe controller
I/O Interface	1 x 6-pin wafer for PS/2 KB/MS 1 x RS-422/485 2 x RS-232 2 x USB 2.0 (by pin header) 2 x USB 2.0 (on rear I/O) 2 x USB 3.0 (on rear I/O) 2 x SATA 6G/s with 5V SATA power connector (RAID 0,1 supported)
Digital I/O	8-bit digital I/O (4-bit input, 4-bit output)
Super I/O	Fintek F81866
TPM	1 x TPM connector (2x10 pin)
SMBus	1 x 4-pin (1x4) wafer
Audio	Realtek ALC892 HD Audio codec
Display Interfaces	VGA (up to 1920x1200@60Hz) 18/24-bit dual-channel LVDS by CH7511B DP to LVDS converter (up to 1920x1200@60Hz) Dual HDMI (up to 2500x1600@60Hz)
Expansion	1 x Full-size PCIe Mini card slot (supports mSATA co-lay SATA port 2)
Watchdog Timer	Software programmable, support 1~255 sec. system reset
Power Supply	12V only DC input 1 x Internal 4-pin (2x2) power connector Support AT/ATX mode
Power Consumption	12V@4.78A (Intel® Core™ i7-4770EQ, 2.4GHz CPU with 4GB 1333MHz DDR3 memory)
Graphic	Intel® HD Graphics Gen 7.5 supports DX11.1 and OpenCL 1.2, OpenGL 3.2 Full MPEG2, VC1, AVC Decode
Operating Temperature	-10°C ~ 60°C
Storage Temperature	-20°C ~ 60°C
Humidity	5% ~ 95%, non-condensing
Dimensions	115mm x 165mm
Weight	GW:850g / NW:350g
Front Panel	1 x 6-pin (1x6) wafer for power LED & HDD LED 1 x 2-pin (1x2) wafer for power button 1 x 2-pin (1x2) wafer for power reset
Fan Connector	1 x 4-pin CPU fan connector 1 x 4-pin system fan connector
iRIS Remote Management Module	1 x iRIS-1010 slot
LAN LED	2 x 2-pin headers for LAN1 Link LED, LAN2 Link LED

1. 4th generation Intel® mobile Core™ i7/i5/i3 or Celeron® on-board processor
2. IEI jumper-less function
3. Triple independent display via dual HDMI+VGA, dual HDMI+LVDS or HDMI+LVDS+VGA
4. DDR3/DDR3L 1600/1333 MHz SDRAM support up to 8GB
5. COM, USB 3.0, SATA 6Gb/s and audio support
6. Intel® GbE LAN with Intel® AMT 9.0 support
7. IEI One Key Recovery solution allows you to create rapid OS backup and recovery
8. Support IPMI 2.0 with iRIS-1010 module