blank
Accessories
Barebones /Computers
Cables/Adapters
Cases
Coolers/ Fans
Displays /LCDs
DVD ROM
Flash Storages
Hard Drives /SSD
Keyboards / Mice
Memory
Motherboards
Networkings
Panel PCs
PICMG Boards
POS systems
Power Supplies
Processors
Services
Softwares
Video Cards
Advantech LCD Kits
/ Open Frame
IEI PICMG Backplane
Your PICMG Solutions
Innodisk SATA DOM
Intel Mini-itx Motherboards
Portwell Neworking Appliance
Jetway JNF894-3455 Motherboard Mini-ITX, Apollo Lake, Celeron J3455 Quad-core, 2 X HDMI, LVDS/eDP, 2 X Intel LAN, 6 X COM, 9-36V
Images shown for reference only
Shipping Extra

IMBM_JETA_AP_0B

Manufacturer Part#:JNF894-3455

  
   Price: $390.95

  
Specification
Model NameNF894
Part NumberJNF894-3455
Form FactorThin Mini-ITX (170 x 170mm)
ProcessorIntel® Celeron J3455 Processor Quad Core 1.50 GHz - 2.30 GHz, 10W TDP
Memory2 x 204-pin DDR3L-1866 SO-DIMM up to 8GB (1.35V required)
GraphicsIntel HD Graphics 500, 250MHz - 750MHz (J3455)
AudioRealtek ALC662VD HD Audio Codec with 3W Amplifier
LAN2 x Intel I211-AT PCI-E Gigabit LAN
Storage1 x SATA3 6Gb/s Connector
1 x M.2 SATA M-key 2242/2280 length
Super IOFINTEK F81966D
TPMIntel fTPM 2.0 (PTT) Trusted Computing Firmware
OEM Option: Onboard TPM v2.0
Back Panel Connectors
1 +9-36V 2.5mm Diameter DC Power Jack
2 HDMI 1.4b (3840 * 2160 @ 30Hz)
2 RJ45 LAN (10/100/1000)
4 USB 3.0
1 3.5mm Audio Jack (Line-out)
Onboard I/O Connectors
1 PCI-E x 1
1 SATA3 6Gb/s Connector
1 M.2 SATA 2242/2280 M Key
1 Mini PCI Express Slot (Full-size)
6 Serial Headers (5 * RS232, 1 * RS232/422/485) 2.00mm pitch
2 USB Pin Headers for 3 additional USB 2.0 Ports 2.00mm pitch
1 40-pin eDP (3840 * 2160 @ 60Hz)
1 30-pin LVDS (1920 * 1080 @ 60Hz)
1 8-pin Inverter 5V/12V
1 SIM Card Slot
1 6-pin SIM Expansion Header
1 8 bit GPIO Header
1 6-pin PS/2 Header
1 9-pin Front Audio Header
1 5-pin SMBUS Header
1 4-pin Fan Header
1 AT/ATX Mode Jumper
1 Chassis Intrusion Jumper
1 4-pin Floppy Power Output (Male)
1 2-pin +9-36V Alternate Power-out (Mating plug: JST VHR-2N or TE 1-1123722-2)
Power Supply for NF894
External Power Supply – the board can be powered with a +9-36V external power supply though a DC connector on the back panel. The rear +9-36V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9-36V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +9-36V 2-pin power connector, where pin 1 is +9-36V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.

Caution: There is no isolation circuitry between the external +9-36V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9-36V DC jack is covered if the internal 2-pin power connector is to be used.
Market Segments Supported
√ Digital Signage
√ Industrial Panel PC
√ Retail (POS/Kiosk/ATM)
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
 



Graphic Fanless Compact Engine
Jetway JBC361F35-T40E-B


Jetway JBC371F35W-T40E-B
Fanless Graphic Compact Engine


4 HDMI Ports (Optional 10 HDMI Ports)
Jetway NF83 AMD Motherboard


Jetway HBJC128F83-B Digital Signage