blank
Accessories
Barebones /Computers
Cables/Adapters
Cases
Coolers/ Fans
Displays /LCDs
DVD ROM
Flash Storages
Hard Drives /SSD
Keyboards / Mice
Memory
Motherboards
Networkings
Panel PCs
PICMG Boards
POS systems
Power Supplies
Processors
Services
Softwares
Video Cards
Advantech LCD Kits
/ Open Frame
IEI PICMG Backplane
Your PICMG Solutions
Innodisk SATA DOM
Intel Mini-itx Motherboards
Portwell Neworking Appliance
Jetway JNF793T2-Q170 Motherboard Mini-ITX, LGA1151, Skylake/Kaby Lake, 3 x HDMI, TPM 2.0
Images shown for reference only
Shipping Extra

ATACOM Part #:IMBM_JETA_CO_17

Manufacturer Part#:JNF793T2-Q170

  
   Price: $345.95

  
Specification
Model NameNF793
Part NumberJNF793-Q170
Form FactorMini-ITX (170 x 170mm)
Processor6th / 7th Gen Intel® Core i7 / i5 / i3 / Pentium Processor
Socket LGA 1151 (Formerly Skylake and Kaby Lake)
ChipsetIntel Q170
Memory2 x 260-pin SODIMM un-buffered Dual Channel DDR4-2133 up to 32GB Total
GraphicsRequires Intel Core processor with Intel HD Graphics
AudioRealtek ALC662VD HD Audio
LAN1 x Intel I219-LM PHY Gigabit LAN (iAMT 11.0)
1 x Intel I211-AT PCI-E Gigabit LAN
Storage4 x SATA3 6Gb/s with RAID 0, 1, 5, 10
1 x mSATA (Full-size)
Super IOFINTEK F81866A
TPMIntel fTPM 2.0 (PTT) Trusted Computing Firmware
Option: Onboard TPM v1.2 or v2.0
Back Panel Connectors
1 9~24V DC-in Jack (1-pin 2.5mm ID, 5.5mm OD)
3 HDMI 1.4 (4096 * 2304 @ 24Hz)
2 Serial Port (2 * RS232/422/485)
2 RJ45 LAN (10/100/1000)
4 USB 3.0
3 3.5mm Audio Jack
Onboard I/O Connectors
1 PCI-E x4 Side-Slot, Supports Jetway ETC4G & ETC4B Expansion Modules
1 mSATA Slot (Full-size)
1 Mini PCI-E Slot (Half-size)
4 SATA3 6Gb/s Connectors
1 USB Pin Headers for up to 2 additional USB 2.0 Ports (2.00mm pitch)
4 Serial Headers (4 * RS232 with 2.00mm pitch)
1 Nuvoton TPM IC onboard (for NF793T)
1 SIM Card Slot
1 Chassis Intrusion Jumper
1 AT/ATX Mode Jumper
1 8-bit GPIO Header
1 4-pin SMBUS/I2C Header
1 7-pin PS2 Keyboard Mouse Header
8 2-pin LAN LED Headers
1 9-pin Front Panel Header
2 4-pin Fan Headers
1 2-pin Internal Power connector (Molex 5566-2)
1 SATA Power connector
Power Supply for NF793
External Power Supply – the board can be powered with a +9V ~ +24V external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +24V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +9V ~ +24V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +9V ~ +24V VDC. The internal 1 x 2 power connector is a Molex 5566-2 header which accepts a Molex 5557-02R connector from the power supply.

Caution: There is no isolation circuitry between the external +9V ~ +24V DC jack and the internal 1 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9V ~ +24V DC jack is covered if the internal 1 x 2 power connector is to be used.
Market Segments Supported
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ IoT
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C

1 Depends on specific processors to support VT-d & TXT, please visit Intel website for details.
 



Graphic Fanless Compact Engine
Jetway JBC361F35-T40E-B


Jetway JBC371F35W-T40E-B
Fanless Graphic Compact Engine


4 HDMI Ports (Optional 10 HDMI Ports)
Jetway NF83 AMD Motherboard


Jetway HBJC128F83-B Digital Signage