blank
Accessories
Barebones /Computers
Cables/Adapters
Cases
Coolers/ Fans
Displays /LCDs
DVD ROM
Flash Storages
Hard Drives /SSD
Keyboards / Mice
Memory
Motherboards
Networkings
Panel PCs
PICMG Boards
POS systems
Power Supplies
Processors
Services
Softwares
Video Cards
Advantech LCD Kits
/ Open Frame
IEI PICMG Backplane
Your PICMG Solutions
Innodisk SATA DOM
Intel Mini-itx Motherboards
Portwell Neworking Appliance
Jetway NF791-3855 /JNF791-3855 Mini-ITX Motherboard w/Intel Skylake-U processor (TDP 15W) DDR4 up to 32GB, support max 4K display resolution
Images shown for reference only
Shipping Extra

IMBM_JETA_MI_38

Manufacturer Part#:JNF791-3855

  
   Price: $299.95

  
Specification
Model NameNF791
Part NumberJNF791-3855
Form FactorMini-ITX (170 x 170mm)
ProcessorIntel® Celeron Processor 3855U Dual Core 1.60GHz, 15W TDP
Memory2 x 260-pin SODIMM un-buffered Dual Channel DDR4-2133 up to 32GB Total
GraphicsIntel® HD Graphics 510
AudioRealtek ALC662VD HD Audio
LAN2 x Realtek RTL8111H PCI-E Gigabit LAN
Storage1 x SATA3 6Gb/s
1 x mSATA
Super IOFINTEK F81866A
TPMIntel fTPM 2.0 (PTT) Trusted Computing Firmware
Back Panel Connectors

1 12V DC-in Jack (1-pin 2.5mm ID, 5.5mm OD)
1 RJ11 port (+12V/+24V)
1 PS/2 Keyboard/Mouse
1 VGA (1920 * 1200 @ 60Hz)
1 HDMI 1.4 (4096 * 2304 @ 24Hz)
1 Parallel Port
1 Serial Port (RS232/422/485)
2 RJ45 LAN (10/100/1000)
4 USB 3.0
2 3.5mm Audio Jack
Onboard I/O Connectors
1 PCI-E x1 Slot
1 Mini PCI-E Slot (Full-size)
1 mSATA/mini PCI-E Slot (Full-size)
1 SATA3 6Gb/s Connector
3 USB Pin Headers for up to 5 additional USB 2.0 Ports
9 Serial Headers (RS232)
1 40-pin eDP Header (4096 x 2304 @ 60Hz)
1 30-pin LVDS / 8-pin Inverter Header (1920 x 1080 @ 60Hz)
1 Chassis Intrusion Jumper
1 AT/ATX Mode Jumper
1 10-pin GPIO Header
1 9-pin Front Audio Header
1 9-pin Front Panel Header
1 5-pin SMBUS Header
1 4-pin 3W Stereo Amplifier Header (Left+Right)
2 4-pin Fan Header
2 2-pin LAN LED Header
1 2-pin Internal Power Connector (Molex 5566-2)
1 SATA Power Connector
Power Supply for NF791
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +12V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +12V VDC. The internal 1 x 2 power connector is a Molex 5566-2 header which accepts a Molex 5557-02R connector from the power supply.

Caution: There is no isolation circuitry between the external +12V DC jack and the internal 1 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V DC jack is covered if the internal 1 x 2 power connector is to be used.
Market Segments Supported
√ Retail (POS/Kiosk/ATM)
√ Lottery Machines
√ Industrial Automation/Control
√ Digital Security & Surveillance
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
 



Graphic Fanless Compact Engine
Jetway JBC361F35-T40E-B


Jetway JBC371F35W-T40E-B
Fanless Graphic Compact Engine


4 HDMI Ports (Optional 10 HDMI Ports)
Jetway NF83 AMD Motherboard


Jetway HBJC128F83-B Digital Signage