Material(s) SGCC Steel and Tempered Glass

	Motherboard Support Mini-ITX, MicroATX, and ATX

	Front I/O Ports 1x USB 3.1 Gen 2 Type-C 1x USB 3.1 Gen 1 Type-A 1x Headset audio Jack Front I/O internal header 1x USB 3.1 Gen 2 Internal Header 1x USB 3.1 Gen 1 Internal Header 1x USB 2.0 Internal Header 1x HD Audio Header

	Filters All Air Intakes

	Smart Device V2 3x Fan channels with Max 10W per channel output 2x RGB LED port support up to 4x HUE 2 addressable LED strips or 5x Aer RGB or Aer RGB 2 fans Built-in noise detection module (Note: If a splitter is used, fan control is regulated depending on the fan connected to the 4-pin port. Do not use low-noise adapters.)

	LED Strip(s) 2 integrated addressable LED strip

	Vertical GPU Mount 2 Slots

	Included Accessories Installation screws 10x Cable ties 1x Headset Audio Jack splitter (4 pole to 3 pole)

	Drive Bays 2.5": 2+1 3.5": 2+1

	Expansion Slots 7

	Radiator Support Front: 2x 140 or 2x 120mm with Pull Rear: 1x 120mm

	Fan Support Front: 2 x 120/ 2 x 140mm Top: 1x 120mm/ 1x 140mm (1 Aer F120 Case Version included) Rear: 1x 120mm (1 Aer F120 Case Version included)

	Fan Specs Aer F120 (Case Version) Speed: 1200 +/- 200 RPM Airflow: 50.42 CFM Noise: 28 dBA Bearing: Rifle Bearing

	Clearance Cable Management: 19-23mm GPU Clearance: Up to 381mm w/o front watercooler installed, up to 325mm with front watercooler installed Vertical GPU Mount Clearance: 40.64mm CPU Cooler: Up to 165mm Front Radiator: 60mm Rear Radiator: 60mm Reservoir and Pump: Up to 180mm (Along cable bar), Up to 86mm (Along bottom panel)

	Item Dimension (L"xW"xH") 21 x 11 x 20 Weight 34.00 LB Warranty Information 2 years