|
StarTech Controller Card PEXM2SAT3422 2xM.2 NGFF SSD RAID Controller Card with 2xSATA3 Ports Retail
|
|
Images shown for reference only
|
|
|
|
|
|
Shipping Extra
|
|
CONA_STAR_12_15
Manufacturer Part#:PEXM2SAT3422 |
|
Price: $179.95
|
|
|
|
|
|
Hardware Bus Type : PCI Express Card Type : Standard Profile (LP bracket incl.) Chipset ID : Marvell - 88SE9230 Industry Standards : Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps) PCI Express 2.0 Hardware RAID 0, RAID 1, RAID 10 Interface : M.2 SATA (NGFF) SATA Port Style : Integrated on Card Ports : 2
|
|
Performance Number of Drives Supported Through Port Multiplier : 1 to 4 Number of Ports That Support Port Multiplier : 2 (can only use 1 PM at a time) Port Multiplier : Yes RAID : Yes Supported RAID Modes : JBOD - (Just a Bunch of Disks) RAID 1 (Mirrored Disks) RAID 0 (Striped Disks) RAID 10 (1+0 Striped set of Mirrored Subset) Type and Rate : SATA III (6 Gbps)
|
|
Connector(s) Connector Type(s) : 1 - PCI Express x4 Male Internal Ports : 2 - M.2 (NGFF B-Key) Receptacle 2 - SATA (7 pin Data) Plug 1 - SP4 (4 pin Small Drive Power) Male
|
|
Software OS Compatibility : Windows 10 (32-bit or 64-bit), 8 / 8.1 (32-bit or 64-bit), 7 (32-bit or 64-bit) Windows Server 2012, 2008 R2 Mac OS 10.8 and later (tested up to 10.11) Linux 3.5
|
|
Special Notes / Requirements Note : The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane. The cards two SATA ports support port multiplier, up to seven drives total (including two M.2 drives). Only one SATA port can use port multiplier at a time, with up to four drives total connected through PM (in a non-RAID configuration) System and Cable Requirements : PCI Express x4 slot (backward compatible with x8, and x16 slots)
|
|
LED Indicators 2 - M.2 drive LEDs (Green) 3 - Pin headers for LEDs
|
|
Environmental Humidity : 20 percent to 80 percent RH (Non-condensing) Operating Temperature : 5oC to 50oC (41oF to 122oF) Storage Temperature : -25oC to 70oC (-13oF to 158oF)
|
|
Included in Package 1 - M.2 SSD RAID controller card 1 - low-profile bracket 2 - M.2 mounting screws 1 - quick-start guide
|
|
Item Dimension (L inchxW inchxH inch) 9 x 7 x 2
Weight 1.00 lb
Warranty Information 2 Year Warranty
|
|
|
|