|
SWIFTECH ALUMINUM COPPER BASE UNIVERSAL HEATSINK FOR P4/AMD
W/ ARTIC ALUMINA CPU THERMAL COMPOUND (FOR ALL AMD SOCKET A,
462, P4 SOCKET 423, 478, 603) (FITS 80MM COOLING FANS) |
|
|
|
| SWIFTECH MCX462-U ALUMINUM
COPPER BASE UNIVERSAL HEATSINK |
|
|
|
| Shipping
Extra |
|
| ATACOM
Part #: FA47_SWFT_MC_XU |
|
Price: $42.95
|
|
|
|
|
|
|
Heatsink:
• CNC machined, C110 copper base,
3"W x 3"L x .375"H, flatness better than 0.001",
micro surface finish 8 or better.
• 371 Helicoid Pins made
of High Thermal
• Conductivity Aluminum Alloy, press fitted in
the base.
• Overall heatsink dimensions
3"x3"x1.56"
• Weight: 20 oz (560g)
|
Retention
mechanism:
• Motherboard fittings: 6-32 Female
to Male 1/4" aluminum round standoffs with nylon washers
and nylons nuts
•
4 compression springs providing exact specified pressure
per chip manufacturers.
• For Intel® Pentium®
4 processors: 2 extension brackets bolt to heatsink and provide
compatibility with • Pentium®
4 (socket 423 and socket 603) and Xeon™ (socket 603)
hole patterns.
|
| |
|
 |
- Hybrid copper base, thin aluminum pin heatsink: the 3/8"
thick copper base provides mass for superior energy absorption.
The thin aluminum pins promote increased turbulence for
more efficient heat dissipation compared to traditional
fin extrusions.
- Patented Helicoid pin design (U.S. patent 6,469,898):
pins are individually machined in an helicoid shape, to
increase their surface area, and further enhance heat dissipation
efficiency.
- F80mm fan mounting brackets: allows users to install
any 80mm fan, for dramatically improved performance to noise
ratio compared to any 60mm fans. Fan attaches to mounting
brackets riveted to the heatsink base.
- Wide range of CPU and motherboard compatibility combined
into one thermal solution: The MCX462-U™ heatsink
ships with all the necessary hardware for installation with
the processors listed below.
- Exceptional quality and attention to details: the heatsink
base is lapped, and polished to near-mirror finish to promote
optimum thermal conductivity.
- The retention mechanism is designed to prevent damage
to the processor during installation or removal of the heatsink,
or during shipping of a completely assembled computers.
Each retention assembly (4 assemblies total) is composed
of an aluminum standoff, secured to the motherboard by a
nylon nut, a #6-32 Philips screw, a spring, and nylon spacer(s).
Installation of the standoffs requires removal of Intel®'s
heatsink supporting base, and necessitates removal of the
motherboard from the computer case.
- Crash tests were conducted by repeatedly (3 times) dropping
a case equipped with an MC462 heatsink from the roof of
a second story building. The heatsink remained securely
attached to the processor, and the processor didn't suffer
any damage.
- Click
Here for installation guide
|
|
