|
Seagate Hard Drive ST12000NM0117 12TB 3.5" 256M 12Gb/s 512e SATA 72 Retail
|
|
Images shown for reference only
|
|
|
|
|
|
Shipping Extra
|
|
ATACOM Part #:HDSA_SEAG_BT_19
Manufacturer Part #: |
|
Price: $366.95
|
|
|
|
|
|
Formatted (512 bytes/sector) 12TB
|
|
Bytes per logical sector 512
|
|
Bytes per physical sector 4096
|
|
Recording density, KBPI (Kb/in max) 2283
|
|
Track density, KTPI (ktracks/in avg.) 392
|
|
Areal density, (Gb/in2 avg) 923
|
|
Internal data transfer rate (Mb/s max) 2685
|
|
Sustained data transfer rate OD (MiB/s max) 248 (261 MB/s max)
|
|
I/O data-transfer rate (MB/s max) 600
|
|
ATA data-transfer modes supported PIO modes 0-4 Multiword DMA modes 0-2 Ultra DMA modes 0-6
|
|
Cache buffer 256MB (262,144KB)
|
|
Power-on to ready (sec) (typ/max) 20/30
|
|
Standby to ready (sec) (typ/max) 20/30
|
|
Startup current (typical) 12V (peak) 2.6A 2.0A (optional configuration through Smart Command Transport)
|
|
Voltage tolerance (including noise) 5V +/-5% 12V +/-10%
|
|
Drive Case temperature 5o to 60oC (operating/tested) -40o to 70oC (nonoperating)
|
|
Temperature gradient (oC per hour max) 20oC (operating) 30oC (nonoperating)
|
|
Relative humidity 5% to 95% (operating) 5% to 95% (nonoperating)
|
|
Relative humidity gradient 30% per hour max
|
|
Altitude, operating -304.8 m to 3,048 m (-1000 ft to 10,000+ ft)
|
|
Altitude, nonoperating (below mean sea level, max) -304.8 m to 12,192 m (-1000 ft to 40,000+ ft)
|
|
Operational Shock (max at 2 ms typical) Read 70 Gs / Write 40 Gs
|
|
Non-Operational Shock (max at 2 ms typical) 250 Gs
|
|
Vibration, operating 5-22 Hz: 0.25 Gs, Limited displacement 22-350 Hz: 0.50 Gs 350-500 Hz: 0.25 Gs
|
|
Operation Rotational vibration 20-1500Hz: 12.5 rads/s2
|
|
Vibration, nonoperating 2-500 Hz: 2.27 Grms ref
|
|
Drive acoustics, sound power (bels) Idle 2.8 (typical) 3.0 (max) Performance seek 3.2 (typical) 3.4 (max)
|
|
Nonrecoverable read errors 1 sector per 1015 bits read
|
|
Annualized Failure Rate (AFR) 0.35% based on 8760 POH
|
|
Maximum Rated Workload Maximum rate of <550TB/year Workloads exceeding the annualized rate may degrade the drive MTBF and impact product reliability. The Annualized Workload Rate is in units of TB per year, or TB per 8760 power on hours. Workload Rate is equal to TB transferred (8760 / recorded power on hours).
|
|
Load-unload cycles 600,000
|
|
Supports Hotplug operation per Serial ATA Revision 3.2 specification Yes
|
|
Item Dimension (L"xW"xH") 6 x 4 x 2 Weight 1.54 LB Warranty Information 5 years
|
|
|
|