Jetway JNF832T2-3455 Motherboard 3.5 Inch SBC, Bay Trail, Celeron J3455, 12V, 2 X HDMI, 2 X M.2, TPM 2.0
Images shown for reference only
Shipping Extra

IMB3_JETA_BA_13

Manufacturer Part#:JNF832T2-3455

 
   Price: $360.95

 
Specification
Model NameNF832
Part NumberJNF832-3455
Form Factor3.5" SBC (148 x 102mm)
ProcessorIntel® Celeron J3455 Processor Quad Core 1.50 GHz - 2.30 GHz, 10W TDP
* Ships with silver flat heatsink for bench testing
Memory1 x 204-pin DDR3L-1866 SO-DIMM up to 8GB (1.35V required)
GraphicsIntel HD Graphics 500, 250MHz - 750MHz (J3455)
AudioRealtek ALC662 HD Audio Codec
LAN1 x Realtek RTL8111H PCI-E Gigabit LAN
Storage1 x SATA3 6Gb/s Connector
1 x M.2 SATA M-key 2242/2280 length
Super IOFINTEK F81962D
TPMIntel fTPM 2.0 (PTT) Trusted Computing Firmware
OEM Option: Onboard TPM v1.2 or v2.0
Back Panel Connectors
1 3.5mm Audio Jack (Line-out)
1 RJ45 LAN (10/100/1000)
1 Micro SIM Slot
2 HDMI 1.4b (3840 * 2160 @ 30Hz)
4 USB 3.0
1 +12V 2.5mm Diameter DC Power Jack

Onboard I/O Connectors
1 SATA3 6Gb/s Connector
1 M.2 SATA 2242/2280 M Key
1 M.2 PCI-E 2230 E Key
1 Mini PCI Express Slot (Full-size)
1 Serial Headers (1 * RS232)
1 USB Pin Headers for up to 2 additional USB 2.0 Ports
1 40-pin eDP (3840 * 2160 @ 60Hz)
1 Micro SIM Slot
1 8 bit GPIO Header
1 AT/ATX Mode Jumper
1 9-pin Front Audio Header
1 5-pin SMBUS Header
1 4-pin Fan Header
1 4-pin Floppy Power Output (Male)
1 2-pin +12V Alternate Power-out (Mating plug: JST VHR-2N or TE 1-1123722-2)
Power Supply for NF832
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +12V 2-pin power connector, where pin 1 is +12V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.

Caution: There is no isolation circuitry between the external +12V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V DC jack is covered if the internal 2-pin power connector is to be used.
Market Segments Supported
√ Digital Signage
√ Retail (POS/Kiosk/ATM)
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
 



Graphic Fanless Compact Engine
Jetway JBC361F35-T40E-B


Jetway JBC371F35W-T40E-B
Fanless Graphic Compact Engine


4 HDMI Ports (Optional 10 HDMI Ports)
Jetway NF83 AMD Motherboard


Jetway HBJC128F83-B Digital Signage