Physical Stats Form Factor 3.5" SBC

	Processor/Cache CPU 8th Generation Intel CoreTM i7-8665UE Processor Single Socket FCBGA-1528 supported, CPU TDP support Up to 15W TDP

	Cores / Cache 4 cores, 8 threads / 8MB cache

	System Memory

	Memory Capacity Up to 64GB Unbuffered non-ECC SO-DIMM, DDR4-2400MHz, in 2 DIMM slots

	Memory Type 2400MHz Non-ECC DDR4 Unbuffered 260pin SODIMM

	DIMM Sizes 4GB, 8GB, 16GB, 32GB

	Memory Voltage 1.2V

	On-Board Devices

	Chipset System on Chip

	SATA I-SATA0 (1x SATA 3.0 Port)

	Network Controllers Single LAN with Intel Ethernet Controller I210IT Single LAN with Intel PHY I219LM LAN controller

	Audio ALC 888S HD Audio

	Graphics Intel UHD Graphics 620 Dual channel 48-bit LVDS(max. resolution up to 1920x1200 at 60Hz), HDMI 1.4 (max. resolution up to 4096x2160 at 30Hz), DP++ (max. resolution up to 4096x2304 at 60Hz)

	Input / Output

	SATA 1 SATA3 (6Gbps) port

	LAN 2 RJ45 Gigabit Ethernet LAN ports

	USB 4 USB 2.0 ports (4 via headers) 4 USB 3.1 Gen2 ports (4 Rears Type A)

	Video Output 1 DP++(Dual-Mode DisplayPort) port, 1 48-bit LVDS port, 1 HDMI port, Dual channel 48-bit LVDS(max. resolution up to 1920x1200 at 60Hz), HDMI 1.4 (max. resolution up to 4096x2160 at 30Hz), DP++ (max. resolution up to 4096x2304 at 60Hz)

	Serial Port / Header 6 COM Ports (6 headers), (4 x RS232, 2 RS232/422/485, RS-485 supports Auto flow control)

	TPM 1 TPM Chip

	Others 1 HD Audio header Mic-in/Headphone-out (Audio only support at 0-60C) 1 8-bit GPIO header 1 SMBus header 1 System Fan

	Expansion Slots PCI-E N/A

	M.2 Key: B-Key , M-Key , E-Key M.2 2242/3042/2280 B-Key (USB3.0/2.0 x 1,SATA Gen3 x 1) with nano SIM holder M.2 2230 E-Key (CNVi/PCI-E 3.0 x1/USB2) M.2 2242/2280 M-Key (PCI-E 3.0 x4,SATA Gen3 x 1), NVMe support

	System BIOS

	BIOS Type AMI UEFI

	BIOS Features ACPI 6.2 SMBIOS 3.0 or later UEFI 2.7 PCI FW 3.0

	Management

	Software AMT, SuperDoctor 5, vPro, Watchdog

	System Mangement Software SuperDoctor 5

	Power Configurations +12-24V DC Power Input ACPI Power Management Control of power-on for recovery from AC power loss Force Power On by Jumper CPU thermal trip support for processor protection

	PC Health Monitoring

	Voltage +12V, +3.3V, +5V, 1.2V (VDIMM), 3.3V standby, Monitors CPU voltages, System level control, System temperature, VBAT

	FAN 1x 4-pin fan header (up to 1 fan), Fan speed control, Low noise fan speed control, PWM fan speed control, System level control, Thermal control tachometer fan connectors

	Temperature CPU thermal trip support

	LED Standby alert LED

	Other Features 8-pin 12-24V DC Power Connector, ACPI power management, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, M.2 NGFF connector, RoHS, System level control, WOL

	Operating Environment

	Operating Temperature Range 0oC - 60oC (32oF - 140oF) Non-Operating Temperature Range -40oC - 85oC (-40oF - 185oF) Operating Relative Humidity Range 8% - 90% (non-condensing) Non-Operating Relative Humidity Range 10% - 95% (non-condensing)

	Weight 3.00lb Warranty Information 1 Year