| Model Name | MF94 |
| Part Number | MF94-00 | MF94-90 |
| Form Factor | 3.5" SBC (148 x 102mm) |
| Processor | Intel® Celeron J3455 Quad Core 1.50 GHz - 2.30 GHz, 10W TDP
* Ships with flat aluminum heatsink for direct attach | Intel® Atom x5 E3940 Quad Core 1.60 GHz - 1.80 GHz, 9.5W TDP
* Ships with flat aluminum heatsink for direct attach |
| Memory | 1 x 204-pin DDR3L-1866 SO-DIMM up to 8GB (1.35V required) |
| Graphics | Intel HD Graphics 500, 250MHz - 750MHz (J3455) | Intel HD Graphics 500, 400MHz - 600MHz (E3940) |
| Audio | Realtek ALC662 HD Audio Codec |
| LAN | 2 x Intel I211-AT PCI-E Gigabit LAN |
| Storage | 1 x SATA3 6Gb/s Connector
1 x M.2 SATA M-key 2242 length |
| Super IO | FINTEK F81962D |
| TPM | Intel fTPM 2.0 (PTT) Trusted Computing Firmware
OEM Option: Onboard TPM v2.0 |
| Back Panel Connectors |
1 3.5mm Audio Jack (Line-out)
2 RJ45 LAN (10/100/1000)
1 HDMI 1.4b (3840 * 2160 @ 30Hz)
1 Micro SIM Slot (for M.2 B-key 3042 Slot)
3 USB 3.1 (GEN 1)
1 USB 2.0
1 +9 - 36V 2.5mm Diameter DC Power Jack
|
| Onboard I/O Connectors |
1 SATA3 6Gb/s Connector
1 M.2 SATA 2242 M Key
1 M.2 3042 B Key (USB 3.0 & PCIe Bus) with Micro SIM Slot
1 Full-size Mini PCIe Slot (USB 2.0 & PCIe Bus)
2 Serial Headers (1 * RS232, 1 * RS232/422/485)
1 USB Pin Headers for up to 2 additional USB 2.0 Ports
1 40-pin eDP (4096 * 2304 @ 60Hz)
1 24-bits Dual Channel LVDS/Inverter (1920 * 1080 @ 60Hz)
1 8 bit GPIO Header
1 AT/ATX Mode Jumper
1 9-pin Front Audio Header
1 5-pin I2C Header
1 5-pin SMBUS Header
1 4-pin Fan Header
1 4-pin SATA Power Output (Male)
1 2-pin +9-36V Alternate DC-in (Mating plug: JST VHR-2N or TE 1-1123722-2)
|
| Power Supply for MF94 |
External Power Supply – the board can be powered with a +9 - 36V external power supply though a DC connector on the back panel. The rear +9 - 36V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9 - 36V and the shell is GND.
Internal Power Supply – the board can alternatively be powered via the internal +9 - 36V 2-pin power connector, where pin 1 is +9 - 36V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.
Caution: There is no isolation circuitry between the external +9 - 36V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9 - 36V DC jack is covered if the internal 2-pin power connector is to be used.
|
| Market Segments Supported |
√ Industrial PC
√ Factory Automation
√ Kiosk
√ IoT
|
| Environment |
Operating Temperature : 0 ~ 60°C
Storage Temperature : -40 ~ 85°C
|
