Model Name | NP691 |
Part Number | JNP691-4200 JNP691-3350 |
Form Factor | 2.5" Pico-ITX (100 x 72mm) |
Processor | Intel® Pentium N4200 Processor Quad Core 1.10 GHz - 2.50 GHz, 6W TDP Intel® Celeron N3350 Processor Dual Core 1.10 GHz - 2.40 GHz, 6W TDP * Ships with CPU heatsink for bench testing |
Memory | 1 * 204-pin DDR3L-1866 up to 8GB total, 1.35V required |
Graphics | Intel HD Graphics 505, 200MHz - 750MHz (N4200) Intel HD Graphics 500, 200MHz - 650MHz (N3350) |
Audio | Realtek ALC662VD HD Audio |
LAN | 1 x Realtek RTL8111H Gigabit LAN |
Storage | 1 x M.2 Slot (M-key, 2242 SATA only) 1 x SATA3 6Gb/s Connector |
Super IO | FINTEK F81962D |
TPM | Intel fTPM 2.0 (PTT) Trusted Computing Firmware |
Form Factor | Pico-ITX Form Factor (100mm X 72mm) |
Back Panel Connectors |
1 RJ-45 ports (10/100/1000)
1 HDMI 1.4b (3840 x 2160 @ 30Hz)
1 Micro SIM Card Slot
2 USB 3.0 ports
1 12V DC-in jack
|
Onboard I/O Connectors |
1 M.2 Slot
1 Full Size Mini PCI-E Slot
1 SATA3 6Gb/s Connector
1 USB Pin Header (2.0 mm pitch) for up to 2 additional USB 2.0 Ports
2 Serial Port Headers (2.0 mm pitch) (1 * RS232, 1 * RS232/422/485)
1 24-bit Dual Channel LVDS/Inverter (CHRONTEL CH7511B chipset up to 1920 x 1200)
1 AT/ATX Mode Jumper
1 10-pin GPIO Header
1 5-pin SMBUS Header
1 9-pin HD Audio Header
1 9-pin Front Panel Connector
1 4-pin Power-out Connector for 2.5" HDD/SSD
|
Power Supply for NP691 |
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V (±5%) and the shell is GND.
|
Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
Environment |
Operating Temperature : 0 ~ 40°C
Storage Temperature : -20 ~ 85°C
|