Physical Stats Form Factor ATX

	Processor/Cache CPU 10th Generation Intel CoreTM i9/CoreTM i7/CoreTMi5/CoreTMi3/Pentium/Celeron Processor Single Socket LGA-1200 (Socket H5) supported, CPU TDP support Upto140W TDP

	System Memory Memory Capacity Upto128GB Unbuffered non-ECC UDIMM, DDR4-2933MHz, in 4 DIMM slots 2933 MHzto4000+MHz(OC) in four 288-pin memory slots.

	Memory Type 128GB DDR4 Unbufferred Non ECC UDIMM

	DIMM Sizes 4GB, 8GB, 16GB, 32GB Memory Voltage 1.2V

	On-Board Devices Chipset Intel Z490 Network Controllers Single LAN with Intel single Ethernet PHY i219V Single LAN with Aquantia AQC107 10G Ethernet Controller

	Audio ALC 1220 HD Audio Graphics DP version 1.4, HDMI version 2.0a Input / Output SATA 4 SATA3 (6Gbps) ports

	LAN 1 RJ45 Gigabit Ethernet LAN ports 1 RJ45 10GBase-T ports

	USB 4 USB 2.0 ports (4 via headers) 4 USB 3.2 Gen1 ports (2 via headers + 2 Type A) 4 USB 3.2 Gen2 ports (2 Rear Type A + 1 Rear Type C, 1 via header) 1 USB 3.2 Gen2x2 ports (1 Type C)

	Video Output 1 DP (DisplayPort) port, 1 HDMI port, DP version 1.4, HDMI version 2.0a

	Serial Port / Header 1 COM Port (1 header) TPM 1 TPM Header

	Expansion Slots PCI-E 4 PCI-E 3.0 x16 slots (16/NA/16/NA or 8/8/8/8), 1 PCI-E 3.0 x1

	M.2 M.2 Interface: 2 PCI-E 3.0 x4, RAID 0 and 1 and 1 CNVi, RAID 0 and 1 Form Factor: 2260/2280/22110 Key: M-Key , E-Key RSTe software raid M.2-E1 port pre-installed one Intel Wi-Fi 6(802.11ax)+BT5.1 module 2 M.2 M-Key PCI-E 3.0 x4, 2260/2280/22110

	System BIOS BIOS Type 256Mb SPI Flash with AMI BIOS BIOS Features ACPI 6.0 Plug and Play (PnP) BIOS rescue hot keys SMBIOS 3.0 or later Riser card auto-detection support

	Management Software SuperDoctor 5, Watchdog System Mangement Software SuperDoctor 5

	Power Configurations ACPI Power Management PC Health Monitoring Voltage +1.0V PCH, +1.8V PCH, +12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 3.3V standby, 5 (4-pin), CPU, CPU temperature, CPU thermal trip support, Memory, Memory temperature, PCH temperature, System temperature, VBAT, VRM temperature 2 CPU Fan header and 3 system Fan header and 1 water cooler power connecter

	FAN 5x 4-pin fan headers (upto5 fans), 5 fans with tachometer status monitoring, Fan speed control, Overheat LED indication

	Temperature CPU thermal trip support LED N/A Other Features 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, RoHS, Voltage and Frequency Overclocking, WOL

	Operating Environment Operating Temperature Range 0oC to 50oC (32oF to 122oF)

	Non-Operating Temperature Range -20oC to 60oC (-4oF to 140oF)

	Weight 3.00 LB Warranty Information 1 Year