| Product SKUs |
| MBD-X8SIE-F-O |
X8SIE-F-O (Standard Retail Pack) |
| Physical Stats |
| Form Factor | • ATX |
| Dimensions | 12" x 9.6" (30.5cm x 24.4cm) |
| Processor/Cache |
| CPU |
LGA 1156 Socket
Intel® Xeon® X3400 series
Intel® Xeon® L3400 series |
| System Memory |
| Memory Capacity |
6x 240-pin DIMM sockets
Supports up to 32 GB DDR3 ECC Registered memory (RDIMM) in 6 DIMM sockets
Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM) in 4 DIMM sockets
1333 / 1066 / 800 MHz
Note: Supports 1-Gb and 2-Gb x8 devices only
|
| Memory Type | 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
| Memory Voltage |
1.5 V |
| On-Board Devices |
| Chipset | Intel® 3420 chipset |
| Serial ATA |
6x SATA (3 Gbps)
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
|
| IPMI |
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
|
| Network Controllers |
2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
Matrox G200eW 16MB DDR2
|
| Super I/O | Winbond 83627DHG-P
|
| Clock Generator | CK505 |
| Input / Output |
| Serial ATA | 6 SATA ports 6 SATA hard drives supported |
| VGA | 1x VGA port |
| LAN |
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port |
| USB |
2x USB rear ports
2x USB on-board
2x USB internal header (4 ports)
Total 8 USB 2.0 Compliant
|
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header |
1x Fast UART 16550 serial port
1x internal header
|
| Chassis ( Optimized for X8SIE-F ) |
| 1U Chassis | CSE-111T-560CB
CSE-512F-280
CSE-512F-520
CSE-513F-260
CSE-513L-260
CSE-811i-280
CSE-811i-520
CSE-811T-410
CSE-811T-420
CSE-811TQ-280
CSE-811TQ-520
CSE-813MTQ-280C
CSE-813MTQ-520CB |
| 2U Chassis | CSE-213A-R900LPB
CSE-216A-R900LP
CSE-216E1-R900LP
CSE-216E2-R900LP
CSE-822T-400LPB
CSE-823MTQ-R700LP
CSE-823TQ-650LP
CSE-825MTQ-R700LPB
CSE-825TQ-560LPV
CSE-825TQ-R700LPV
CSE-826A-R1200LPB
CSE-826TQ-R800LPV |
| 3U Chassis |
CSE-833T-550
CSE-833T-650
CSE-833T-R760
CSE-835TQ-R800B
CSE-836A-R1200B
CSE-836E1-R800V
CSE-836E2-R800V
CSE-836TQ-R800V
CSE-933E1-R760
CSE-933E2-R760
CSE-933T-R760
CSE-936A-R1200B
CSE-936A-R900B |
| Mid-Tower |
CSE-733TQ-465B
CSE-733TQ-645 |
| Tower / 4U Rackmount |
CSE-743T-645
CSE-743T-650
CSE-743T-R760
CSE-743TQ-865B
CSE-743TQ-865B-SQ
CSE-743TQ-R760
CSE-745TQ-800
CSE-745TQ-R800B
CSE-846A-R1200B
CSE-846E1-R900B |
| Important Chassis Notes |
To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| Expansion Slots |
| PCI-Express |
1 (x8) PCI-E 2.0 (using x16 slot)
1 (x4) PCI-E (using x8 slot)
|
| PCI | 1 32-bit PCI slot |
| System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features |
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3 |
| Management |
| Software |
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Super Doctor III
Watch Dog
NMI |
| Power Configurations | ACPI / ACPM Power Management Main Switch Override Mechanism Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal/External modem ring-on |
| PC Health Monitoring |
| CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
Total of 5 fan headers supporting up to 5 fans
Five 4-pin fan headers
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI |
| LED |
CPU / System Overheat LED
+5V Standby alert LED
|
| Other Features | • Chassis Intrusion Detection
• Chassis Intrusion Header |
