| Product SKUs |
| MBD-C7X58 -O | C7X58 (Standard Retail Pack) |
| MBD-C7X58 -B | C7X58 (Bulk Pack) |
| Physical Stats |
| Form Factor | ATX |
| Dimensions | 12" x 10" (30.5cm x 25.4cm) |
| Processor/Cache |
| CPU | LGA 1366 Socket Intel® Core™ i7-980X, i7-975 and i7-965 Extreme Edition Intel® Core™ i7 series Intel® Xeon® 5600/5500 series Intel® Xeon® 3600/3500 series |
| System Bus | QPI (up to 6.4 GT/s) |
| System Memory |
| Memory Capacity | Supports up to 24 GB 1600 / 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory Three Channel memory bus 6 DIMM sockets |
| Memory Type | 1600 / 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB |
| Memory Voltage | 1.5 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices |
| Chipset | Intel® X58 Express chipset ICH10R |
| SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) |
| Network Controllers | Dual Intel® 82574L Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Audio | Realtek ALC883 7.1 HD audio |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | CK505 |
| Input / Output |
| Serial ATA | 6 Serial ATA ports 6 SATA hard drives supported |
| Floppy | 1 Floppy controller;1.44MB |
| LAN | 2 RJ45 LAN ports |
| USB | 8x USB rear ports 2x USB on-board 1x USB internal header(2 ports) Total 12 USB 2.0 Compliant |
| Audio | 6 x analog outputs 1 x S/PDIF digital output |
| Keyboard/Mouse | PS/2 keyboard and mouse ports |
| Serial Port/Header | 2 Fast UART 16550 serial header |
| IEEE 1394a | 2 x headers |
| Chassis (Optimized for C7X58) |
| Mid-tower | CSE-733E-465B CSE-733i-450 CSE-733i-465B CSE-733i-645 CSE-733T-465B CSE-733T-645 CSE-733TQ-465B CSE-733TQ-500B CSE-733TQ-645 |
| Tower/4U Rackmount | CSE-743i-645 CSE-743T-645 CSE-743TQ-865B CSE-743TQ-865B-SQ |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| Expansion Slots |
| PCI-Express | 2 (x16) PCI-e 2.0 slots 1 (x4) PCI-e slot (using x8 slot) |
| PCI | 1 x 32 bit PCI slot |
| System BIOS |
| BIOS Type | 4Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
| Management |
| Software | Super Doctor III Watch Dog NMI |
| Power Configurations | ACPI / ACPM Power Management Main Switch Override Mechanism Keyboard Wakeup from Soft-Off Power-on mode for AC power recovery Internal/External modem ring-on Suspend to RAM (STR) |
| PC Health Monitoring |
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| Fan | Total of six fan headers supporting up to 6 fans Six 4-pin fan headers 6x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LCD | CPU / System Overheat LED Suspend-state indicator LED +5V Standby alert LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment/Compliance |
| RoHS | RoHS Compliant 6/6,Pb Free |
| Environmental | Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
