|
|
Supermicro X9DB3-TPF E-ATX Intel XEON E5-2400 Intel C606 LGA2011 Motherboard DDR3, 2x GBLAN, 1x 10G SFP+, IPMI, SATA 6G, SAS, RAID, VGA, DOM : MBD-X9DB3-TPF-O
|
|
Images shown for reference only
|
|
|
Supermicro X9DB3-TPF E-ATX Intel XEON E5-2400 Intel C606 LGA2011 Motherboard DDR3, 2x GBLAN, 1x 10G SFP+, IPMI, SATA 6G, SAS, RAID, VGA, DOM : MBD-X9DB3-TPF-O MBD-X9DB3-TPF-O
|
|
|
|
| Shipping Extra
|
|
| ATACOM Part #: MB14_SUPE_C6_23
|
|
Price: $425.70
|
|
|
|
|
 | Product SKUs | | MBD-X9DB3-TPF-O | X9DB3-F (Standard Retail Pack) | | Physical Stats | | Form Factor | - | | Dimensions | 12" x 13" (30.48cm x 33.02cm) | | Processor/Cache | | CPU | Intel® Xeon® processor E5-2400 (up to 95W TDP **)
Dual Socket B2 (LGA 1356)
Cache
Up to 20MB | | System Bus | QPI up to 8 GT/s
** Motherboard supports this maximum TDP. Please verify your system can thermally support | | System Memory | | Memory Capacity | 12x 240-pin DDR3 DIMM sockets
Supports up to 384 GB DDR3 ECC Registered memory (R/LRDIMM)
Supports up to 96 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM) | | Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs | | DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB | | Memory Voltage | 1.5 V, 1.35 V | | On-Board Devices | | Chipset | Intel® C606 chipset | | Serial ATA | SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
SATA 3.0 6Gb/s with RAID 0, 1, 5, 10 | | SAS | SAS from C606
RAID 0, 1, 10 support | | IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC | | Network Controllers Video | Intel® 82599EN Single Port 10G SFP+
Intel® i210 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10G SFP+, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201F PHY (dedicated IPMI)
(Both CPUs need to be installed for 10Gb LAN port to be enabled) Matrox G200eW | | Input / Output | | SATA SAS | 2 SATA 3.0 ports (6Gb/s)
4 SATA 2.0 ports (3Gb/s) 8 SAS ports (3Gb/s) | | LAN | 1 SFP+ 10GbE LAN port
2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port | | VGA | 1 VGA port | | USB | 8 USB 2.0 ports total
(2 rear + 4 via header + 2 Type A) | | Keyboard / Mouse | - | | Serial Ports DOM | 2 Fast UART 16550 ports: 1 rear, 1 header 1 DOM (Disk on Module) power connector | | TPM | 1 TPM 1.2 20-pin Header | | Chassis ( Optimized for X9DB3-F ) | | Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. | | Expansion Slots | PCI-Express
1x PCI-E 3.0 x16
2x PCI-E 3.0 x8
1x PCI-E 3.0 x4 (in x8)
1x PCI-E 2.0 x4 (in x8)
1x PCI-32 Legacy | | System BIOS | | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | | BIOS Features | Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI | | 1. Dual socket B2 (LGA 1356) supports
Intel® Xeon® processor E5-2400
2. Intel® C606 chipset
3. Up to 384GB DDR3 1600MHz ECC
reg. DIMM; 12x DIMM sockets
4. Expansion slots: 1 PCI-E 3.0 x16,
2 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8),
1 PCI-E 2.0 x4 (in x8), 1 Legacy PCI 32
5. Intel® 82599EN 10G SFP+ Single port
+ Dual i210 GbE LAN
6. 2x SATA3 and 4x SATA2 ports
7. 8x SAS/SATA2 ports from C606
8. Integrated IPMI 2.0 and KVM with
Dedicated LAN
9. 8x USB 2.0 ports
(2 rear, 4 via header + 2 Type A) |
|
