| Model |
| Brand | Supermicro |
| MBD-X9SCM -B | X9SCM (Bulk Pack) |
| Processor/Cache |
| CPU | Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors *** *
Socket H2 (LGA 1155) |
| System Memory |
| Memory Capacity | 4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) |
| Memory Type | 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V, 1.35V |
| Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| GPU | BMC integrated Matrox G200 |
| Chipset | Intel® C204 PCH chipset |
| SATA | 4x SATA2 (3Gb/s) w/ RAID 0, 1, 5, 10
2x SATA3 (6Gb/s) w/ RAID 0, 1 |
| Network Controllers | Intel® 82579LM and 82574L, 2x Gigabit LAN ports
Virtual Machine Device Queues High efficient I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Super I/O | Nuvoton NCT6776F |
| Input / Output |
| Serial ATA | 6 SATA ports
6 SATA hard drives supported |
| LAN | 2x RJ45 LAN ports |
| USB | 9x USB 2.0 ports total
(2x rear + 6x via header + 1x type A) |
VGA | 1x VGA port |
| DOM |
1x DOM (Disk on Module) power connector |
| Serial Port
Others | 2x Fast UART 16550 serial port
(one header and one rear port)
TPM 1x TPM 1.2 20-pin Header |
| System BIOS |
| BIOS Type | 64Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI (SMBIOS) 2.7
ACPI 4.0
PCI 2.3
USB Keyboard support |
| Chassis |
| Form Factor | uATX |
| Important Chassis Notes |
To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| Model | 1U Chassis
CSE-113MTQ-330CB
CSE-113MTQ-R400CB
CSE-512F-350B
CSE-512F-441B
CSE-811TQ-R441B
CSE-813MTQ-350C
CSE-813MTQ-441CB
CSE-813MTQ-R400CB |
| Dimensions |
| Dimentions |
9.6" x 9.6", (24.4cm x 24.4 cm) |
| Management |
| Software | SuperDoctor® III
Watch Dog
NMI |
| Power Configuration | ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on |
| Expansion Slots |
| PCI-Express | 2 (x8) PCI-E 3.0 slots***
2 (x4) PCI-E 2.0 in x8 slots |
| PC Health Monitoring |
| Voltage |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| Fan |
Total of 5 fan headers supporting up to 5 fans
Five 4-pin fan headers
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors |
| Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI |
| LED |
CPU / System Overheat LED
+5V Standby alert LED |
| Other Features | Chassis intrusion detection
Chassis intrusion header |
